FIGURE 9
PRESS-STACK
CABLE
(67475)
PRESS-STACK
CABLE
(67475)
STEP 10
¯Route the PRESS-STACKCABLE(5) around the pulleys and 1-brackets as shownin STEP9, (Removepulleys for ease instal- lationo)
FIGURE 10 STEP 10
¯ To assemble the PRESS-STACKCABLE(5) follow the cable routing as shownand use the following steps:
PRESS- STACK CABLE (67475)
¯Route the thread end of PRESS-STACKCABLE
(5)up and over the PULLEYin the TOPBOOM above the WEIGHTSTACK.(Remove pulley for ease of installation.)
¯Screw the threaded end of the PRESS-STACK CABLE(5) approximately 1" into the end of the SELECTORSHAFI" of the HEADPLATEon the WEIGHTSTACKas shownin FIGURE10.
¯SECURELYtighten the pulley connection from the previousstep.
