ParaBody 895101 manual ~ ***PLEASE Identify ALL Parts Before Beginning Assembly

THERE IS A RISK ASSUMEDBY INDIVIDUALS WHOUSE THIS TYPE

OF EOUIPMENT. TO MINIMIZE RISK. PLEASE FOLLOWTHESE RULES:

Consult.your physician before beginninganyexcercise progrmn

"

1.

2.Inspect equipmentdaily. Tightenall loose connectionsand replace warnparts immediately. Failureto do so mayresult in serious injury.

3.Donot allow minorsor children to play on or aroundthis equipment.

4.Excercise with care to avoid injury.

5.If unsureof properuse of equipment,call your local PamBodydistributor or call the ParaBody customerservice depa~huentat 1-$00-325-9714.

~***PLEASE IDENTIFY ALL PARTS BEFORE BEGINNING ASSEMBLY***

ITEM	PART #		DESCRIPTION		""	OTY
I	6589903		W'LDMT,DIPHANDLESUPPORTWHT				I
2	6590303		WLDMT,DIPHANDLEWHT
							I
HARDWARELIST:		***PLEASE SORT HARDWAREBEFOREBEGINNINGASSEMBLY***
ITEM	PART #		DESCRIPTION			QTY
I	3103101		GRIP,-If4X5CLOSEDEND				2
2	...........6405201		2.CAP,END2SQ10.-14GA				3.
3	3102502		WASIFLAT-~R,1/2ID				4.
4~.......................£	3102801		NUT,NYLOCK1/2-13	.. .........~	~........~....		2. "
5			BOLT,HHG21/2-13X3
							2.
6
	6145801		KNOB,3PRONG3/8-16X3/4				1.
7	3120801		PIN,DETENT.390DIAX4-I/2				1.
8.~.g~.~.. . .~~..~..~ ~..~...		6600301	GLIDE,3.75X3.75tYHMWPEQTY1				2.

1.Attach two 2" ENqDCAPSto DIP HANDLEas shovm on drawing.

2.Attach one 1-1/4 x 5" GRIP to each HANDLE.

3.Insert one 2" ENDCAP into end of DIP HANDLESUPPORT.

4.Assemble DIP HANDLEto DIP HANDLESUPPORTusing two 1/2" x 3" bolts, four 1/2" flat washers and two 1/2" lock nuts as shown on drawing.

5.Attach one GLIDEto inside of each plate as shown in Detail A.

6.Install DIP ATTACHMENTto GUNRACKas shown on drawing. Insert DETENTPIN in first hole for use on 893 PROSYSTEM,and second hole for use on 866 STRENGTH BUILDING SYSTEM.

7.Securly tighten 3 PRONGKNOBin threaded hole as shown on drawing.

66(30101 2 03/22/96