For assembly to the the 777 Gym System .
4
Make sure MAIN ARM
5
18
14
17
13 | 1 |
FIGURE 2 | 12 1/2 X 5” |
|
STEP 2:
•NOTE: Follow STEP 2 for the assembly of the LEG PRESS to the 777 Gym System. If you have the 220 or 880 Gym Systems proceed to STEP 3.
•SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 2.
•SECURELY assemble the MAIN ARM (4) to the FRAME (1) using one 1/2 X 5” BOLT (12), two 3/4” FLANGE BEARINGS (14), one 3/4 X 4” SHAFT (17) and one 1/2” LOCK NUT (13). See FIGURE 2. (NOTE: Make sure MAIN ARM is orientated cor- rectly, top hole should be
•SECURELY assemble two 1” SQ. GLIDES (18) to each side of the MAIN ARM (4) where the MAIN ARM (4) contacts the FRAME
(1) See FIGURE 2.
•Proceed to to STEP 3.
5