14.Identify the two Rear Ankle Braces (34), which have holes in the indicated locations.
Slide a Rear Ankle Brace (34) onto the Ankle Brace Tube (18). Attach the Rear Ankle Brace with two M4 x 15mm Screws (58). Make sure that the Screws are tightened into the indi- cated holes in the Ankle Brace Tube. Next, press a 19mm Round Cap (45) into the Ankle Brace Tube, and attach the Round Cap with an M4 x 15mm Screw (58).
Attach the other Rear Ankle Brace (34) to the Ankle Brace Tube (18) in the same way.
15.Slide a Front Ankle Brace (22) onto the round tube on the Lock Frame (11). Next, press a 19mm Round Cap (45) into the round tube, and attach the Round Cap with an M4 x 15mm Screw (58).
Attach the other Front Ankle Brace (22) in the same way.
16.Pull the Short Adjustment Knob (74) out as far as it will go, and insert the end of the Leg Frame (10) a few inches into the Backrest Frame (8).
See the inset drawing. Press the round tab on the Leg Frame Bushing (38), and press the Leg Frame Bushing upward into the Backrest Frame (8). Make sure that the round tab is in the indicated hole in the Backrest Frame.
Then, slide the Leg Frame (10) farther into the Backrest Frame (8), and engage the Short Adjustment Knob (74) into one of the holes in the Leg Frame.
14 |
|
|
|
|
|
| 34 |
| 34 |
|
|
| 45 |
|
|
| 58 | 18 | Holes |
| Holes | ||
| 58 |
| |
|
|
| |
15 |
|
|
|
|
| 11 | 22 |
| 22 |
| |
|
|
| |
| 45 |
|
|
| 58 |
|
|
16 | 8 |
|
|
| Hole |
|
|
| 38 |
|
|
| Tab |
| 8 |
|
|
| |
| 10 |
|
|
|
|
| 10 |
|
|
| 74 |
|
|
| Holes |
11 |
|
|
|