JVC KV-RA2 manual Specifications, Amplifier Section

SPECIFICATIONS

ENGLISH

AMPLIFIER SECTION

Maximum power output:

Front:	40 watts per channel
Rear:	40 watts per channel
Continuous power output (RMS):
Front:	15 watts per channel into 4 Ω,
	40 to 20,000 Hz at no more
	than 0.8% total harmonic
	distortion.
Rear:	15 watts per channel into 4 Ω,

40 to 20,000 Hz at no more than 0.8% total harmonic distortion.

Load impedance: 4 Ω (4 to 8 Ω allowable)

Frequency response: 40 to 20,000 Hz Line input sensitivity/Impedance:

0.5 V/20 kΩ

Speaker input sensitivity/Impedance: 4 V/1.5 kΩ

Signal-to-signal ratio: 70 dB

GENERAL

Power requirements: Operation voltage:

DC 14.4 V (11 V – 16 V allowable) Grounding system: Negative ground Dimensions (W x H x D):

Amplifier unit: 200 x 162 x 30 mm

(7-7/8" x 6-7/16" x 1-3/16") Display unit: 104 x 40 x 20 mm

(4-1/8" x 1-5/8" x 13/16")

Mass:

Amplifier unit: 750 g (1.7 lbs)

Display unit: 240 g (0.53 lbs)

Design and specification subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

12