JVC AX-V5BK manual Selecting the Center Speaker Size, Large Small no

Page 18

English

SETTING

When the shut-off time comes, the amplifier turns off (into standby mode) automatically.

To check or change the time remaining until the shut-off time:

1.Press SETTING if necessary, so that the Control %/ Þ/ @/ #buttons work for setting the Sleep Timer.

2.Press Control % / Þif necessary, until “<SLEEP>” appears on the display.

3.Press Control @ / #.

The remaining time until the shut-off time appears in minutes.

• To change the shut-off time, press Control @ / #repeatedly.

To cancel the Sleep Timer, press Control @/ #repeatedly in step 3 above until “0” appears on the display. (The SLEEP indicator goes off.)

Turning off the power (into standby mode) also cancels the Sleep Timer.

Selecting the Center Speaker Size

SURROUND

SETTING

You can register the information about the center speaker after all connections are completed.

If you do this registration first, you do not have to adjust the center speaker mode when you want to activate the surround sound.

However, to register the information, first you have to set the surround mode either to “PROLOGIC” or “3CHLOGIC.” (You cannot select the center speaker size when the surround mode is “OFF” or “HALL.”)

On the front panel only:

1.Press SURROUND so that the Control %/ Þbuttons work for selecting the surround mode. The lamp above the button lights up.

2.Press Control %/ Þuntil “PROLOGIC” or “3CHLOGIC” appears on the display. The indicator of the selected mode also lights up on the display.

3.Press SETTING so that the Control % / Þ/ @/ #buttons work for selecting the center speaker size.

The lamp above the button lights up.

4.Press Control %/ Þuntil “CNTR SPK” (Center Speaker) appears on the display.

5.Press Control @/ #to select the appropriate item about your center speaker. Each time you press the button, the display changes to show the following:

LARGESMALL NO

LARGE

Select this mode when the size of the center speaker is the same as that of the front speakers.

 

 

SMALL

Select this mode when the size of the center speaker is smaller than that of the front speakers.

 

 

NO

Select this mode when you do not use a center speaker.

 

(This mode cannot be selected when you select “3CHLOGIC.”)

 

 

Note:

This “center speaker size” setting is so related to the center mode setting for the Dolby Surround that changing this setting affects and changes the center mode to a relevant mode, and vice versa.

For example;

•If you select “LARGE,” the center mode is automatically set to “WIDE,” and vice versa.

•If you select “SMALL,” the center mode is automatically set to “NORMAL,” and vice versa.

•If you select“NO,” the center mode is automatically set to “PHANTOM” for PRO LOGIC, and vice versa.

Page 13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AX-V5BK If in Doubt Consult a Competent Electrician English Deutsch Français Nederlands Español Italiano Voorzichtig -- Power en STANDBY/ON AX-V5BK Table of Contents Switches, Buttons and Controls Remote ControlFront Panel Before Installation Checking the Supplied AccessoriesGetting Started Connecting the Speakers Connecting the front speakersConnecting the rear and center speakers Case 3 When you connect front and rear speakers Case 1 When you connect only front speakersCase 2 When you connect front speakers and a center speaker About the speaker impedance of the speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio Components Video ComponentsVideo component connections VCRPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Press Power to set it in the on positionTurning the Power On and Off Standby Basic OperationsSelecting the Source to Play Muting the Sound Adjusting the VolumeSelecting the Front Speakers Selecting different sources for picture and soundTo listen with only headphones Listening with HeadphonesHeadphones and your hearing Recording a SourceListening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance Using the Sleep TimerLarge Selecting the Center Speaker SizeLarge Small no SmallTo cancel the One Touch Operation function Using the One Touch OperationTo store the sound settings Press ONE Touch Operation One Touch OperationUsing the Preset SEA Modes Selecting Your Favorite SEA ModePress Preset to select the effect level Movie SPORTS2 JazzWhat is surround? Using the Surround ProcessorUsing JVC’s Hall Surround Prologic 3CHLOGIC HallPress Rear +/- to adjust the rear speaker output level Delay 1 Delay 2 DelayDelay Press Delay to adjust the delay timeSpeaker Arrangements for Dolby Surround This casePreparing for Dolby Surround Wide Normal PhantomIf necessary, adjust the speaker output balance as follows Left front Center Right front Speaker Rear speakersPress Test to start checking the speaker output balance Press Test again to stop the test toneUsing Dolby Surround Appears on the displayAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Amplifier Synchronized RecordingUsing the Remote Control VideoVideo CH+ Tape Tuner VCR Phono TV VCR Audio Preset Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierGeneral EN, GE, FR, NL, SP, IT 0497OFYOTKJEM

AX-V5BK specifications

The JVC AX-V5BK is a high-fidelity integrated amplifier that exemplifies precision and power, catering to audio enthusiasts seeking a robust and versatile sound experience. With its chic black finish, the AX-V5BK not only enhances the aesthetics of any audio setup but also emphasizes JVC's commitment to quality in design and performance.

At the heart of the AX-V5BK are its outstanding amplification capabilities. It delivers a power output of 100 watts per channel into 8 ohms, ensuring that even the most demanding speakers perform optimally. This ample power translates to dynamic sound reproduction across various genres, from the softest whispers in classical music to the thunderous crescendos of rock.

The amplifier incorporates a sophisticated power supply system which employs a toroidal transformer. This technology reduces electromagnetic interference and enhances the efficiency of the power delivery, resulting in cleaner and more stable sound. The AX-V5BK's current feedback topology enhances its response speed and accuracy, providing detailed transients and a more engaging listening experience.

Moreover, the JVC AX-V5BK features multiple audio inputs, including line, phono, and digital inputs, making it compatible with a wide range of audio sources. The built-in phono stage allows users to connect turntables directly, catering to vinyl enthusiasts who appreciate the warm tones of analog sound. The amplifier also offers both treble and bass tone controls, letting listeners tailor the sound to their personal preferences.

For connectivity, the AX-V5BK includes A and B speaker outputs, which can facilitate the usage of multiple speaker sets. This feature is particularly beneficial for those who wish to enjoy music in different rooms or set up a home theater system.

To further enhance the user experience, the AX-V5BK features a remote control for effortless operation and control over various functionalities. This level of convenience ensures that users can enjoy their music without having to constantly adjust settings manually.

In conclusion, the JVC AX-V5BK is a formidable integrated amplifier laden with features that cater to audiophiles. With its powerful output, superior build quality, and user-friendly design, it represents a fine choice for anyone looking to elevate their audio experience to new heights. Whether for casual listening or critical music appreciation, the AX-V5BK undoubtedly stands out in its class.
Top Page Image Contents