I
Slide Mechanism to insert or Exchange Handles
STEP 8:
ITEM | QTY | DESCRIPTION |
I | 1 | QUICK CONNECT COUPLER |
J | 1 | QUICK CONNECT HOUSING |
K | 1 | QUICK CONNECT SLEEVE |
L | 1 | QUICK CONNECT SPRING |
M | 2 | M5 HEX SCREW |
K
L
J
M
Cable
K
Dissemble one QUICK CONNECT by removing the two M5 HEX SCREWS (M) from the QUICK CONNECT COU- PLER (I). Carefully remove the QUICK CONNECT SPRING (L), the QUICK CONNECT SLEEVE (K) and the QUICK CONNECT HOUSING (J).
Slide the QUICK CONNECT HOUSING (J), QUICK CONNECT SPRING (L), and QUICK CONNECT SLEEVE (K) onto the cable as shown. Insert the cable end into the QUICK CONNECT COUPLER (I).
Slide the entire assembly over the QUICK CONNECT COUPLER (I). Attach the QUICK CONNECT COUPLER (I) and QUICK CONNECT HOUSING (J) together. Use the two M5 HEX SCREWS (M) to tighten.
NOTE: IF NECESSARY, ENSURE CABLES ARE PROPER LENGTH; MAKE NECESSARY ADJUSTMENTS TO THE WEIGHT STACK PULLEY (TIGHTEN OR LOOSEN); THREAD THE END OF THE CABLE; AND REMOVE THE PUL- LEY FROM THE HOUSING AND SPIN CLOCKWISE OR COUNTER CLOCKWISE TO LOOSEN/TIGHTEN.
17