Mid Pulley Covers - See Attached
Front Cover 8317301
Rear Cover 8263501
Top Cover 8263401
STEP 1:
Slide the RIGHT SUPPORT LEG (55) over the MOUNTING TUBE (A) of the RIGHT UPRIGHT (4). Loosely secure the RIGHT SUPPORT LEG (55) and RIGHT UPRIGHT (4) to the FRONT UPRIGHT (1) using two M12 x 80mm SCREWS (60), four 1/2” WASHERS (61), and two M12 HEX NYLOCK NUTS (62) as shown.
With the UPPER PULLEY ASSEMBLY (25) oriented as shown, insert the UPPER PULLEY ASSEMBLY (25) into the top of the RIGHT UPRIGHT (4) and secure together the RIGHT UPRIGHT (4), FRONT UPRIGHT (1), and UPPER PULLEY ASSEMBLY (25) using two M10 x 30mm SCREWS (58) and two FLAT 3/8” WASHERS (57).
Repeat the above steps to assemble the LEFT UPRIGHT (5) and LEFT SUPPORT LEG (56) to the FRONT UPRIGHT (1).
NOTE: THE TOP PULLEY WELDMENT ATTACHES TO THE INSIDE OF THE UPRIGHT SIDES AND THE ORIENTA- TION SHOULD BE AS SHOWN.
7