D
Slide Mechanism to insert or Exchange Handles
STEP 5:
ITEM | QTY. | DESCRIPTION |
32 | 6 | QUICK CONNECT ASSEMBLY |
D1 QUICK CONNECT COUPLER
E1 QUICK CONNECT HOUSING
F1 QUICK CONNECT SLEEVE
G1 COMPRESSION SPRING
H2 M5 HEX SCREWS
F
G
E
H
Cable
F
Dissemble the QUICK CONNECT (32) by removing the two M5 HEX SCREWS (H) from the QUICK CONNECT COUPLER (D). Carefully remove the COMPRESSION SPRING (G), the QUICK CONNECT SLEEVE (F) and the
QUICK CONNECT HOUSING (E).
Slide the QUICK CONNECT HOUSING (E), COMPRESSION SPRING (G), and QUICK CONNECT SLEEVE (F) onto the cable as shown. Insert the cable end into the QUICK CONNECT COUPLER (D).
Slide the entire assembly over the QUICK CONNECT COUPLER (D). Attach the QUICK CONNECT COUPLER (D) and QUICK CONNECT HOUSING (E) together. Use the two M5 HEX SCREWS (H) to tighten.
NOTE: IF NECESSARY, ENSURE THE CABLES ARE THE PROPER LENGTH AND MAKE NECESSARY ADJUST- MENTS TO THE WEIGHT STACK PULLEY (TIGHTEN OR LOOSEN).
14