C |
14 |
2 |
2 |
10 |
29
STEP 4:
Remove one QUICK CONNECT from the end of one UPPER (SHORT) CABLE (29).
Insert the end (where the QUICK CONNECT was removed) of the UPPER (SHORT) CABLE (29) through the UPPER SWIVEL PULLEYS (2) and follow routing illustration to the FLOATING PULLEYS (14) through to the HEAD PLATE PULLEY (10). Continue to the other side, ending at the other UPPER SWIVEL PULLEYS (2).
Reattach the previously removed QUICK CONNECT to the end of the UPPER (SHORT) CABLE (29).
NOTE: THE CABLE MUST BE INSERTED BETWEEN THE PULLEY AND THE CABLE RETAINING CLIPS (C) AND MOVE FREELY.
13