JVC ME-EX90, RX-EX90, XL-EX90, CA-EX90 manual Daily Timer

Daily Timer

Use the remote control to set this timer. It can be set during either power ON or STANDBY. Be sure to set the clock before attempting this operation.

/CLOCK TIMER

1Press CLOCK/TIMER to display “DAILY”.

Blinks Blinks

DAILY

2Press CLOCK/TIMER again.

“ON” appears in the display.

Blinks

–/L

+

/ R

SET

3 Set the start time (ON).

1Set the hour.

Use +/R or –/L to display the appropriate hour, then press SET.

Hold down +/R or –/L to change the hour sequentially.

2Set the minutes.

Use +/R or –/L to display the appropriate minute, then press SET.

Hold down +/R or –/L to change the minutes in 10 minutes steps.

Blinks

After setting the minutes (before pressing SET)

–/L

+

/ R

SET

4Set the end time (OFF).

Set the end time (OFF ) in the same way you set the

start time (ON). Blinks

After setting the minutes (before pressing SET)

5Select the source to be played when the timer

activates.

Press +/R or –/L repeatedly to select the source, then press SET.

Each time +/R or –/L is pressed, the source switches as follows.

TUNER MD CD TAPE

When selecting TUNER

Press +/R or –/L repeatedly to select desired preset channel, then press SET.

When selecting MD

Press +/R or –/L repeatedly to select desired track number, then press SET.

•You can select any track number from 1 to 20.

•Pressing SET without selecting a track starts playback from the first track of the MD.

36 CA-EX90