Life Fitness HDCR manual Step

9

8

4 6

9

6 7

8

1

1

2

2

10

3

7 6

6 7

4 5

	9
	7
	6
	2
	A
B	6
5	4

STEP 2:

‰LOOSELY assemble the two CROSS SUPPORTS (8) and two PULL-UP SUPPORTS (9) to the top of the FRONT RIGHT & LEFT UPRIGHTS (1 & 2) using eight 1/2 X 4-1/2” BOLTS (4), sixteen 1/2” INT TOOTH LOCK WASHERS

(6) and eight 1/2” LOCK NUTS (7).

‰Assemble the LOWER CROSS BRACE (10) to the inside of the two BASES (3) using four 1/2 X 4-1/2” BOLTS (4), four BACKING DOME WASHERS (5), four 1/2” INT TOOTH LOCK WASHERS (6) and four 1/2” LOCK NUTS (7).

NOTE: An Upper Band Peg accessory is available for the HDCR8. Assemble the UPPER BAND PEG ACCESSORY (A) to the FRONT LEFT UPRIGHT (2) at the same time as the PULL-UP SUPPORTS (9). Use the same hardware with the exception of replacing the 1/2 X 4-1/2” BOLTS (4) with the provided 1/2 X 5” BOLTS (B).

10