JVC MX-DVA9 manual Using Recording Timer, Select the preset station, If necessary

Page 43

Continued

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically. You can set the timer whether the system is on or off.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, sets the volume level to “VOL MIN,” and starts

recording when the on-time comes (the indicator continues flashing while the timer is operating). Then, when the off-time comes (“OFF” flashes just before the off-time), the unit automatically turns off (on standby).

The timer setting remains in memory until you change it.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

To correct a mis-entry while setting the timer, press

CANCEL/DEMO.

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press CLOCK/TIMER repeatedly until “REC” appears on the display.

indicator lights up and the REC (Recording Timer) indicator also starts flashing on the display.

Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

(Daily timer setting)

Canceled

 

Clock

 

ON TIME

 

 

 

 

setting

(Recording

 

(The hour digits

timer setting)

 

start flashing.)

 

3 Press CLOCK/TIMER again.

“ON TIME” appears for 2 seconds on the display, then the unit enters on-time setting mode.

4 Set the on-time you want the unit to turn on at.

1)Turn 4/ ¢ to set the hour, then press SET.

2)Turn 4/ ¢to set the minute, then press SET.

“OFF TIME” appears for 2 seconds on the display, then the unit enters

off-time setting mode.

5 Set the off-time you want the unit to turn off (on standby) at.

1)Turn 4/ ¢ to set the hour, then press SET.

2)Turn 4/ ¢to set the minute, then press SET. The unit enters preset station selecting mode.

6 Select the preset station.

1)Turn 4/ ¢to select the band (“TUNER FM” or “TUNER AM”), then press SET.

2)Turn 4/ ¢ to select a preset channel number, then press SET.

The REC (Recording Timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence.

7 Press STANDBY/ON

to

STANDBY/ON

turn off the unit (on standby)

STANDBY

if necessary.

 

 

If you want to listen to another source while recording

Press REC START/STOP or 7to stop recording. Without stopping it, you cannot change the source.

Even if you unplug the AC power cord or if a power failure occurs

Once you set the timer, the timer setting may remain stored in memory in a few days. In this case, check whether the timer setting still remains or not.

– 40 –

Image 43
Contents MX-DVA9 Mises en garde, précautions et indications diverses Important Products Safety Instruction Introduction PrecautionsAbout This Manual Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel Front PanelSee pages in the parentheses for details Display WindowAUX button Remote ControlRemote Control FM/AM button 10FM antenna Supplied Accessories Connecting AntennasPutting the Batteries into the Remote Control Getting StartedTurn the AM loop antenna until you have the best reception Connecting SpeakersClose the speaker terminal Ideal Speaker Layout Connecting Other EquipmentTo connect a center speaker and rear speakers To connect a subwooferAbout sounds output through the rear terminals Canceling the Display DemonstrationOn the unit only To connect a TVSelecting the Sources Turning On or Off the PowerSetting the Clock Common OperationsReinforcing the Bass Sound Adjusting the VolumeAdjusting the Front Speaker Output Balance To turn down the volume level temporarilyPress and hold SET until SEA Cont appears on the display Creating Your Own Sound Modes -Manual ModeOn the unit only Select one of the preset sound modes To use your own sound modeListening to FM and AM Broadcasts Tuning into a StationTuning into a Preset Station Presetting StationsVCD and CD If appears on the screen when pressing a buttonPlaying Back Discs-Introduction Disc StructureSelecting the Subtitle DVD FeaturesSelecting the Multi-Angle View Selecting the Audio LanguageDVD Playback Basic Disc PlaybackLoading Discs Common Basic Disc OperationsTo use Time Search and Chapter Search on the TV screen To go to another chapterTo show the on-screen indication To go to another track VCD/CD PlaybackTo use Time Search on the TV screen Forward Search Prohibiting Disc Ejection-Tray LockSearching for a Particular Point Reverse SearchMenu Operations On the remote control only Press Menu or TitleLoad discs To check the programed contentsTo modify the program Move to Program On the remote control Load discsPress Play Mode Press Control + or − toRepeating Playback Repeat Play Playing at Random-Random PlayPress Control + or − to move to A-B Repeat On the remote control onlyRepeat On the unit Press Repeat before or during playStill Picture/Frame-by-Frame Playback DVD/VCD Special Effect PlaybackSlow Motion Playback-Slow Playback starts from the selected scene To cancel the function, select Theater OFFPress Select or Enter Opening scene appears in sequence up toPlaying Back a Tape Playing Back TapesLocating the Beginning of a Song -Music Scan Press DSP Surround or to select a desired DSP Surround mode Activating and Adjusting the DSP Surround ModeYou can use the DSP Surround mode for any source you like Press REC START/STOP RecordingRecording a Tape on Deck B Check the tape direction of deck BYou can record from one tape to another Dubbing TapesVCD/CD Direct Recording Press DubbingAuto Edit Recording To cancel Auto Edit RecordingTo change the tape length manually Operating the On-Screen Menu Basic ProcedureOn the remote control only Press Choice Press Cursor 3 or 2to select a proper setting you wantSelect the initial language for Changing the Initial Language SettingsChanging the Various Audio Settings On Audio menu, you can change the following sound settingsPress Cursor or 5 to move More about Speaker SettingExpert adjustment procedure Display Expert Speaker Setting menuPress Cursor / 5 / 3/ 2 to move Changing the Display SettingsPress Cursor 3or 2 to adjust the output level, then Press Cursor 5 / / 3/ 2 to moveEven if 43 PS is selected, the screen size may Changing the System SettingsOn System menu, you can change the following settings PS Pan Scan SelectSetting the Parental Lock Level Using the Parental LockUnlocking the Parental Lock Temporarily How Daily Timer actually works Using the TimersUsing Daily Timer Press CLOCK/TIMER againPress SET to complete the Daily Timer setting When selecting Tuner FM or Tuner AMWhen selecting Disc Turn 4/ ¢to set the volume levelIf necessary Using Recording TimerSelect the preset station How Recording Timer actually worksWait for about 5 seconds after specifying the time length Using Sleep TimerTimer Priority On the remote control only Press SleepAvailable operations Using AV Compu Link Control SystemAutomatic power on/off AV Compu Link ConnectionHandling cassette tapes Cleaning the unitTo clean the disc Handling discsAppendix B-Troubleshooting Audio CD with DTS Output Signals Playback discVideo CD, Audio CD 44.1 kHz, 16 bit Linear PCMAppendix E-Language Code for On-Screen Menu Appendix F-Country Code for Parental Lock Page Appendix G-Glossary Specifications Authorized Service Centers Limited Warranty 0701MWMMDWJEM

MX-DVA9 specifications

The JVC MX-DVA9 is a compact yet powerful audio system that seamlessly blends advanced technology with user-friendly features, positioning itself as an ideal choice for music lovers and home entertainment enthusiasts alike. Known for its dynamic audio performance, the MX-DVA9 is equipped with a range of features that enhance its functionality and usability.

One of the standout features of the MX-DVA9 is its built-in CD player, which supports various disc formats, providing flexibility for users who enjoy physical media. Moreover, the system incorporates an AM/FM tuner, allowing listeners to explore a wide array of radio stations and discover new music and programming. The presence of dual cassette decks also appeals to nostalgic users who wish to relive their favorite cassette recordings.

Designed with versatility in mind, the MX-DVA9 supports several audio input options, including USB and auxiliary ports, which enable connection to various external devices such as smartphones, tablets, and laptops. This feature is particularly beneficial in today’s digital age, where streaming music has become increasingly popular. The unit is also compatible with Bluetooth technology, allowing for wireless streaming from compatible devices, thus adding an extra layer of convenience for users.

The MX-DVA9 impresses with its sound quality as well. It features powerful built-in speakers that deliver crisp and clear audio with minimal distortion, enhancing the listening experience whether you’re playing music, watching movies, or enjoying podcasts. The system also includes an equalizer that allows users to adjust sound settings to their preference, enabling customization for different music genres or personal tastes.

Additionally, the MX-DVA9 is designed with a sleek, modern aesthetic that fits well into any home décor. Its compact size makes it easy to place in smaller spaces without sacrificing audio quality. The user-friendly interface and remote control add to the convenience, allowing users to navigate their audio options with ease.

Overall, the JVC MX-DVA9 combines classic features with modern technology, providing a well-rounded audio solution for both casual listeners and dedicated audiophiles. With its robust performance, connectivity options, and stylish design, the MX-DVA9 stands out as a remarkable choice for anyone looking to enhance their audio experience.