USING OLYMPIC WEIGHTS ON THE LEG LEVER
To use Olympic weights on the Leg Lever (17), insert the Weight Adapter Bushings (24) into the ends of the Weight Adapter (32). Slide the Weight Adapter over the weight tube on the Leg Lever. Insert the Weight Adapter Pin (29) into the weight tube.
USING THE CURL PAD
To use the Curl Pad (8), unscrew the Adjustment Knob
(37)and lift the Leg Lever (17) out of the Bench Leg
(1).Insert the Curl Pad into the Bench Leg, and secure it with the Adjustment Knob.
Note: When not using the Curl Pad, store it away from the bench.
17 |
|
32 | 29 |
24 |
|
| 8 |
17 | 37 |
| |
| 1 |
Part ListÑModel No. IMBE12500 |
| R1100A | |||
|
|
|
|
|
|
Key No. | Qty. | Description | Key No. | Qty. | Description |
1 | 1 | Bench Leg | 23 | 1 | Seat Mounting Bracket |
2 | 1 | Adjustable Bench Leg | 24 | 2 | Weight Adapter Bushing |
3 | 4 | M6 x 16mm Screw | 25 | 6 | Foam Pad |
4 | 4 | M6 x 55mm Screw | 26 | 6 | 19mm Round Inner Cap |
5 | 1 | Bench Frame | 27 | 2 | Backrest Tube |
6 | 8 | M10 Washer | 28 | 6 | 25mm x 40mm Inner Cap |
7 | 1 | Bench Base | 29 | 1 | Weight Adapter Pin |
8 | 1 | Curl Pad | 30 | 5 | M6 Washer |
9 | 1 | Curl Upright | 31 | 1 | M10 x 80mm Bolt |
10 | 2 | 50mm x 70mm Outer Cap | 32 | 1 | Weight Adapter |
11 | 14 | M10 Nylon Locknut | 33 | 1 | 20mm x 50mm Inner Cap |
12 | 2 | M10 x 60mm Button Head Bolt | 34 | 1 | M6 x 35mm Bolt |
13 | 1 | Stabilizer | 35 | 1 | Backrest Adjustment Bracket |
14 | 1 | Seat | 36 | 1 | Seat Adjustment Bracket |
15 | 1 | Backrest | 37 | 1 | Adjustment Knob |
16 | 3 | Pad Tube | 38 | 1 | 25mm Angled Outer Cap |
17 | 1 | Leg Lever | 39 | 1 | 25mm Round Inner Cap |
18 | 2 | Bench Joint Plate | 40 | 4 | 45mm Square Inner Cap |
19 | 1 | Bench Base Joint Plate | 41 | 1 | M8 x 70mm Bolt |
20 | 2 | 50mm Square Outer Cap | 42 | 1 | M8 Nylon Locknut |
21 | 9 | M10 x 70mm Bolt | # | 1 | UserÕs Manual |
22 | 2 | M10 x 190mm Bolt | # | 1 | Exercise Chart |
Note: Ò#Ó indicates a
14