Keys Fitness ST-NBB owner manual Step

Page 9

Assembly

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

STEP 5

Attach the two Butterfly Arms (#40) to the Upright Beams (#2)&(#12) with two M10x120 Hex Bolts (#39), two M10 Regular nuts (#37), two D10 spring washers (#38) and two M10 aircraft nuts (#36).

Insert the Handrail Bar (#41) through upper holes on Butterfly Arm (#40), slide Foam Rollers (#18) on Handrail Bars (#41). For easy assembly, spray inside of foam rollers with glass cleaner or hairspray.

9

Image 9
Contents Questions? Call Us Toll Free Keys Fitness Helpline Table of Contents Safety Tips Important Safety InformationAssembly Step Step Step Step Step ST-NBB Parts List Rev a Parts ListExploded View Keys Fitness PRODUCTS, L.P Strength Trainer Warranty Warranty