JVC LVT1346-006A manual Standard Recording, Tape to Tape Recording DUB- Bing, CD Synchro Recording

Page 21

Using the Cassette Deck (Recording)

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with this procedure.

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in Deck B.

2 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

3 Press the CD REC START button on the Unit.

“CD REC” appears on the display and the “REC” indicator lights up and the Tape indicator (3) blinks. Then, the System begins CD Synchro Recording and the tracks on the CD are re- corded on the tape.

When recording of the tracks of all CDs is finished, the CD Player and Cassette Deck stop.

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “NO REC” will appear on the display.

•After the CD Player has played the entire CD or all the pro- grammed tracks, the tape automatically stops.

To stop at any time during the recording process, press the 7button. The CD Player and the Cassette Deck will be stopped.

English

1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

Tape travelling direction

2 Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

•For CD recording, see “CD Synchro Recording” mentioned below.

•For dubbing, see “Tape to Tape Recording (DUBBING)” described below.

3 Press the REC START/STOP button on the Unit.

The “REC” indicator lights up and the Tape indicator (3) blinks and the System begins recording.

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “NO REC” will appear on the display.

To stop during recording, press the REC START/STOP but- ton on the Unit, or press the 7button.

Recording an AM Station to Tape (Beat Cut)

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, press the FM MODE button on the Remote Control to eliminate the beats.

•When making SLEEP timer settings while doing CD Syn- chro recording, set enough time to allow for the CD to fin- ish playing, otherwise the power will go off before recording is completed.

Tape to Tape Recording (DUB- BING)

Recording from one tape to another is called dubbing. You can dub tapes simply, with just a single button.

1 Insert the source cassette you want to copy from into Deck A for playback.

2 Insert a blank or erasable cassette you want to copy onto into Deck B for recording.

3 Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously and the “REC” indicator lights up.

During dubbing, the Deck indicators “A” and “B” light up al- ternately.

•If no tape is inserted into Deck A, “NO TAPE” will appear on the display.

•If no tape is inserted into Deck B, “NO TAPE” will appear on the display.

To stop dubbing, press the REC START/STOP button on the Unit or the 7button.

1 Set to AM station and start recording.

2 Press the FM MODE button on the Remote Control to eliminate the beats.

Each time you press the button, the display changes as shown below:

BEAT 1 ïBEAT 2

CD Synchro Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.

1 Prepare CDs. (See page 12.)

Press the CD1-3 button (that you want to make recording), and then press the 7 button.

•If you want to record specific tracks only, you need to pro- gram the tracks beforehand. (See page 14.)

•If you want to record one CD only, you need to load one CD only.

•During dubbing, you can hear sound effects through the speakers or headphones. However, the sound is dubbed without sound effects.

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MX-KC2 Produto Laser DE Classe Producto Laser ClasePrecaucion Features IntroductionHow This Manual Is Organized Table of Contents Set the Voltage Selector Switch AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Remote ControlUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not suppliedConnecting the AM Antenna Connecting the SpeakersRear Panel of the Unit Connecting to the Wall Outlet Connecting External EquipmentDemo Mode Compu PlayECO Mode ECO Turning the Power On and OffAdjusting the Volume Basic OperationsSelecting the Sound Mode Entering the Number with the Remote Control Numeric KeysFade-out Muting Fade Muting Reinforcing the Bass Sound Active Bass EXTuning In a Station Using the TunerSetting the AM Tuner Interval Spacing One Touch RadioPresetting Stations To Change the FM Reception ModeUsing the Unit When playing a CD-R or CD-RW Using the CD PlayerFor MP3 discs More about MP3 discsAbout Disc Indicator Changing the MP3 Playback ModeOn the Remote Control only To Load CDs To Unload CDsTo Select a Group For MP3 Group mode only Basics of Using the CD Player- Normal PlayTo Play CDs To Select a TrackTo Make a Program Programming the Playing Order of the TracksTo Play the Program You Have Made To Exit and Re-enter Program PlayRandom Play Tray Lock Function Repeating TracksResume Play for MP3 Disc Playing a Tape Using the Cassette Deck Listening to a TapeTo Fast-Wind a Tape Close the cassette holder gentlyThings To Know Before You Start Recording Using the Cassette Deck RecordingTape a REC START/STOP Tape B Push Open Program CD REC Start Dubbing Tape B Random Tape aTape to Tape Recording DUB- Bing Standard RecordingCD Synchro Recording To Record Any Sound Source to TapeUsing an External Equipment Listening to the External EquipmentAUX Using the Timers Setting the ClockFixing the Clock Setting the OFF time Example Setting the Daily TimerSetting the on time Example Selecting the music sourceTurning the Daily Timer On and Off Setting the REC Recording TimerTurning the REC Recording Timer On and Off Timer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsCare And Maintenance Specification TroubleshootingImportante para la línea de la red CA Important for mains AC lineImportante para a ligação à tensão da rede CA EN, SP, PR

0505NYMCREBET, SP-MXKC2, LVT1346-006A specifications

The JVC LVT1346-006A, known for its innovative audio solutions, showcases a compelling blend of features, technologies, and characteristics that set it apart in the audio equipment market. This model is synonymous with high-quality sound reproduction, catering to both casual listeners and audiophiles seeking enriched audio experiences.

One standout feature of the JVC LVT1346-006A is its advanced audio processing technology. The device employs a sophisticated digital signal processor (DSP) that ensures optimal sound clarity and precision. The DSP enhances various audio frequencies, allowing users to enjoy a well-balanced sound profile across different music genres. Additionally, the model supports a wide range of audio formats, ensuring compatibility with diverse music libraries.

The build quality and design of the JVC LVT1346-006A also deserve mention. Its aesthetically pleasing design not only enhances its visual appeal but also contributes to the durability of the product. The materials used are of high quality, ensuring that the device can withstand the rigors of regular use without compromising performance.

In terms of connectivity, the JVC LVT1346-006A is equipped with Bluetooth technology, allowing seamless wireless streaming from smartphones, tablets, and other devices. This feature adds a layer of convenience, as users can enjoy their favorite tunes without the hassle of tangled wires. Furthermore, the inclusion of USB ports and auxiliary inputs provides additional versatility, accommodating various playback options.

The soundstage created by the JVC LVT1346-006A is impressive, offering expansive audio performance that makes the listening experience immersive. This is enhanced by the model's integrated speaker system, designed to deliver crisp highs and deep lows, making it suitable for movies, music, and gaming.

Overall, the JVC LVT1346-006A, alongside its model counterpart the SP-MXKC2 and 0505NYMCREBET, exemplifies a harmonious blend of technology and design. With its advanced audio processing, robust connectivity options, and superior sound quality, it stands as a noteworthy choice for anyone looking to elevate their audio experience. This makes it an ideal addition to any home audio setup, catering to the diverse needs of contemporary users. Whether for casual listening or immersive entertainment experiences, the JVC LVT1346-006A delivers on all fronts.
Top Page Image Contents