Assembly
Unpack all parts and place them in a clear area. Be sure to remove all packing material.
NOTE: Hand Tighten bolts and nylon nuts until machine is fully assembled.
STEP 1:
Attach Rear Upright (2) to Rear Base Frame (1) using Bolt (22), two Washers (28) and Nylon Lock Nut (26).
Connect the Front Upright (4) to the U Base Frame (5) using two Bolts (22), four Washers
(28)and two Nylon Lock Nuts
STEP 2:
Attach Cross Frame (3) to Rear
Upright (2) and Front Upright
(4)using four Bolts (19), eight Washers (27) and four Nylon Lock Nuts (25).
4