![](/images/new-backgrounds/1134342/1343427x1.webp)
ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 1
Connect Foot Plate Support (4) to Main Frame (1) using:
2 | x | (11) Pillow Block Bearing | |
4 | x | (26) | Bolt |
8 | x | (25) | Washer |
4 | x | (34) | Nylon Lock Nut |
Attach Foot Plate (5) to Foot Plate Support (4) using:
2 | x | (20) Bronze Bushing |
1x (9) Foot Plate Shaft
2x (33) Screws
Y