3 | 4 |
3.Connect the Controller Extension Wire (28) in the Main Upright (2) to the Controller Wire in the Main Frame Assembly. Also, connect the Tension Control Wire in the Main Upright to the Reed Switch Wire (27) in the Main Frame Assembly as shown in the diagram. Then slide the Main Upright (2) onto the Main Frame Assembly (1) and secure with Screws (56), Flat Washers (50) and Locknuts (49).
4.First connect the Controller Wire (28) to the Console (5). Then connect the Monitor (5) to the Main Upright (2) with the Screws (59) already supplied in the back of the Console.
6 | 7 |