CTRL | control panel connecting |
CD/SIG | signal cable group |
F1, F2, FH1, FH2, FH3, FH4, F/LIGHT | seven fuses (details see FORM 1) |
FORM 1
Marking
POWER
F1, F2
FH1, FH2, FH3, FH4
F/LIGHT
F/ROOF LAMP
HT1, HT2, HT3, HT4
LIGHT
ROOF LAMP
COLOR LAMP
CTRL
CD/SIG
ANALOG AUDIO
Sauna Room Connections Introduction Component name to connect
power cord fuse Heater fuse Reading lamp fuse
Roof lamp fuse (optional) Heater power cord Reading lamp connector Roof lamp connector
Color lamp connector( in some models) Control panel connection
For CD/temperature sensor/buzzer etc. connection CD/Radio power connector
CD/radio fan power plug Audio frequency signal plug
10)Install the CD/Stereo radio
1.Remove the two screws from the top of the CD player and discard. (not necessary for JVC brand CD/radio stereo), Put in the CD/radio from the outside.
2.Attach the bracket using the screw provided. (Figure 27)
| FIGURE 27 |
3. | Plug in the CD/radio power. (Figure 28) |
4. | Plug the L/speaker and R/speaker connectors. (Figures 29 |
& 30) |
|
5. | Plug in the CD/radio antenna faucet. (Figure 31) |