HAND PULSE WIRES
CONSOLE TUBE PLATE
M5x20 BUTTON
HEAD SCREWS
HANDLEBAR
M8 LOCK NUTS
M8 FLAT WASHERS
FRAME
CONSOLE
EXTENSION WIRE
M8x57 BUTTON
HEAD SCREWS
CONSOLE TUBE
CONSOLE INSTRUCTIONS
INITIAL OPERATING PROCESS
(After the computer is powered on with batteries or adapter connection)
Step One Use UP or DOWN dial to select U1 (User number 1) to U4 (User number 4) as the user's identification.
Step Two You may turn the right button clockwise or
Step Three You may turn the right button clockwise or
7.Attach the HANDLEBAR to the CONSOLE TUBE with BUTTON HEAD SCREWS, FLAT WASHERS and LOCK NUTS. Connect PICK UP WIRE and EXTENSION WIRE from FRAME to those in the CONSOLE TUBE. Carefully plug HAND PULSE WIRES, PICK UP WIRE and EXTENSION WIRE into back of CONSOLE. Make sure wires are securely attached. Connect CONSOLE to CONSOLE TUBE PLATE using BUTTON HEAD SCREWS. Connect CONSOLE TUBE to FRAME with BUTTON HEAD SCREWS and FLAT WASHERS.
Step Four You may turn the right button clockwise or
Step Five Press START/STOP button to start training.
Available preset training functions:
TIME: Preset area is from
DISTANCE: Preset area is from
CALORIES: Preset area is from 0 to 990, each increment is 10 cal.
WATTS: Preset area is from 10 to 350, each increment is 10 watt. (WATTS can be preset under MANUAL mode only)
PULSE: Preset area is form 30 to 240, each increment is 1 BPM. (Excluded in TARGET HR control mode)
10 | 11 |