5.Connect the Extension Wire (54) in the Upright Post (56) to the Sensor Wire (45) in the Main Frame (1). Slide the Tension Cable (59) from the Main Frame (1) up through the Upright Post (56). Connect the Upright Post (56) to the Main Frame
(1) using Hex Bolts (55) and Arc Washers (19).
5
56
55
19
55
19
54
59
45
6.Pull the Tension Cable (59) out of the Upright Post (56) and connect to the Resistance Knob (58) as in Steps 1 and 2:
Step 1: Put the Tension Controller cable end into the spring hook.
Step 2: Pull the Tension Controller cable into the gap of the bracket. Insert the Tension Controller (58) into the Upright Post (56) and connect with the screw attached (57).
54
59 58
57 | 6 |
56
59
59
5858
10 | 11 |