Epic Fitness GZFW20611 manual Adjustment Knob Diagram

Page 7

ADJUSTMENT KNOB

If an adjustment knob sticks, it will need to be relubri- cated. Disassemble the knob and apply a light coat- ing of lithium grease. Reassemble the knob as shown in the diagram. If the adjustment knob still does not function properly, the spring may need to be replaced. To order a new spring, refer to ORDERING REPLACEMENT PARTS on the back cover of this manual.

Adjustment Knob Diagram

Adjustment

Spring

 

Pin

 

Housing

Knob

 

 

CUSHION ATTACHMENT

Important: All EPIC STRENGTH™ cushions are fab- ricated using dense plywood with tee-nuts installed for bolting to the machine framework. Because these tee-nuts are held by the plywood, they will not with- stand the torque that standard nuts and bolts will. Therefore, when tightening the cushion bolts, turn them only until they are snug and the cushion does not move or feel loose. Overtightening may strip the tee-nuts from the plywood and make it impossible to remove the cushion in the future.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model No. GZFW20611 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Before YOU Begin Assembled DimensionsAdjusting the PAD Position AdjustmentsDaily MaintenanceWeekly Adjustment Knob Diagram Adjustment KnobQty Description Part LIST-Model No. GZFW20611R0204A Limited Warranty Warranty Terms and ConditionsLimited Warranty on Commercial Equipment Limited warranty does not apply toYour Responsibility Receipt of Parts and ServiceExclusive Warranty Unauthorized Changes to WarrantyOrdering Replacement Parts
Top Page Image Contents