Step

�

��

�

��

�	�

Figure 3

Parts:

•Cross Brace (#1)

•Left Stand Leg assembly from Step 1

•Right Stand Leg assembly from Step 2

Hardware	Qty
• 3" Screws (#12)	4
• Washers (#11)	8
• Nuts (#10)	4

Tools:

• Hex Key (7/32”)

3-1Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3) using the hardware shown in Figure 3. Make sure that the narrower edge of the Cross Brace (#1) is closer to the Stand Leg (#4) uprights.

Note: Do not tighten hardware.