Bowflex 5.1 manual Attaching Back Assembly to Main Frame

Page 10

STEP 3: Attaching Back Assembly to Main Frame

10

9

14

11

Parts:

•(1) Bench Frame Assembly from Step 2

•(1) Back Pad Assembly - Item 9

•(1) Head Pad Assembly - Item 10

Hardware:

•(6) 5/16 inch Allen Bolt, 2 1/2 inch long - Item 11

•(6) Flat Washer 5/16 inch - Item 14

Tools:

• 3/16 Allen Wrench

Assembly Steps:

3-1 Align the Back Pad Assembly (9) to the Bench Frame Assembly between the open holes as shown.

3-2 Secure with the hardware as shown.

3-3 Align the Head Pad Assembly (10) to the Bench Frame Assembly between the open holes as shown.

3-4 Secure with the hardware as shown.

Image 10

Contents SelectTech 5.1 Bench Owner’s/Assembly Manual Page Table of Contents Important Safety Precautions Important Safety InstructionsSafety Warning Labels Before You Assemble Hardware and Tool Guide Parts Guide Assembly Instructions Attaching Front and Rear StabilizersAttaching Seat Pad to Main Frame Attaching Back Assembly to Main Frame Attaching Leg Hold Down Attachment Congratulations Bench Positions Flat DegreesCompanion Exercise Equipment Warranty Information Bench MaintenancePage Bowflex SelectTech 5.1 Bench Warranty Registration Card IMPORTANT! Mail Within 30 Days of PurchaseWhat Is Covered Please fold over and tape before mailingImportant Contact Numbers Offices in the United States