PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M10 Washer (12)
M8 Washer (27)
M6 Washer (28)
M10 Nylon
Locknut (2)
M4 x 15mm
Screw (20)
M8 x 15mm
Screw (19)
M6 x 20mm
Screw (21)
M6 x 40mm Screw (22)
M8 x 40mm Bolt (25)
M6 x 55mm Screw (24)
M10 x 180mm Bolt (23)
M8 x 70mm Carriage Bolt (26)
M8 Nylon
Locknut (29)
5