JVC 0603MWMMDWORI, LVT1115-003B manual Troubleshooting, Specifications

Page 25

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Power does not come on.

No sound is heard.

 

Possible Cause

 

 

Action

The power cord is not connected to an

Insert the plug into the socket.

AC outlet.

 

 

 

 

 

 

 

 

•

Connections are incorrect or loose.

•

Check all connections and make

 

 

 

 

corrections. (See pages 6 and 7.)

•

A pair of headphones is connected.

•

Unplug the headphones from the

 

 

 

 

PHONES jack.

 

 

 

 

 

Hard to listen to broadcasts because of noise.

The disc does not play.

Impossible to record.

•Antennas are disconnected.

•The AM (MW) loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

The disc is upside down.

Small tabs on the back of the cassette are removed.

•Reconnect the antenna correctly and securely.

•Change the position and direction of the AM (MW) loop antenna.

•Extend FM antenna and orient to the best reception position.

Put the disc in with the label side up.

Cover the holes with adhesive tape.

Operations are disabled.

Unable to operate the unit by the remote control.

The built-in microprocessor has

Unplug the AC power cord then plug it

malfunctioned due to external electrical

back in.

interference.

 

 

 

 

 

 

 

 

•

The path between the remote control

•

Remove the obstruction.

 

and the remote sensor on the unit is

 

 

 

 

blocked.

 

 

 

•

The batteries are exhausted.

•

Replace the batteries. (See page 6.)

•

You are using the remote control too

•

Signals cannot reach the remote

 

far from the unit.

 

 

sensor. Move closer to the unit.

 

 

 

 

 

Specifications

Design and specifications are subject to change without notice.

Amplifier Section—CA-UXH9

Output Power (IEC 268-3):

10 W (5 W + 5 W) at 4 Ω (10% THD)

Speakers/Impedance:

4 Ω – 16 Ω

Tuner

FM tuning range:

87.50 MHz—108.00 MHz

AM (MW) tuning range: 522 kHz—1 629 kHz

CD player

Dynamic range:

60 dB

Signal-to-noise ratio:

60 dB

Wow and flutter:

Immeasurable

Cassette deck

Frequency response:

 

Normal (type I):

100 Hz—10 000 Hz

Wow and flutter:

0.35 % (WRMS)

General

Power requirement:

AC 230 V

, 50 Hz

Power consumption:

22 W (at operation)

3.0W (on standby)

Dimensions (W/H/D) (approx.):

 

145 mm x 209 mm x 226 mm

Mass (approx.):

2.8 kg

Supplied accessories

See page 6.

Speaker Section—SP-UXH9

Type:

Full range bass-reflex type

Speakers:

10 cm cone x1

Power handling capacity: 5 W

Impedance:

4 Ω

Frequency range:

100 Hz to 15 kHz

Dimensions (W/H/D) (approx.):

 

135 mm x 209 mm x 152 mm

Mass (approx.):

1.3 kg each

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Micro Component System Class Laser Product Above ALL Introduction PrecautionsAbout This Manual Contents Main Unit Location of the Buttons and ControlsTop view Front view Inside the front coverMain unit Display window on the front panelDisplay window To open the front coverRemote Control Getting Started You can connect the speakers using the speaker cordsUnpacking Connections Release your finger from the clampFor better reception of both FM and AM MW To connect AM MW and FM antennasTurning On the Power Setting the ClockBasic and Common Operations Selecting the SourceSelecting the Sound Modes Adjusting the VolumeReinforcing the Bass Sound To turn off the sound temporarilyListening to FM and AM MW Broadcasts Tuning in to a StationPress TUNER/BAND to select either Tuner FM or AMTuning in to a Preset Station Presetting StationsPress or to select a preset number Press Program Press or to select a preset number Press Program againChanging the RDS Information Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search Playing Back the Entire Disc-Normal Play Playing Back DiscsBasic Disc Operations On the remote control only Place a discProgramming the Track Playing Order Program Play Press ¢ or 4 to select the track number, then press ProgramPlaying only Introductions-Intro Play Playing at Random-Random PlayRepeating Tracks-Repeat Play Displaying the Remaining Time during PlaybackPlaying Back a Tape Playing Back TapesPress # play To remove the cassette, press &/ whileRecording from the Radio RecordingTune in to the station you want to record Press ‡ recording To protect your recordingsRecording Discs Disc Synchronized Recording To stop recording, pressUsing the Daily Timer Using the TimersPress Timer ON/OFF to activate Using the Sleep TimerDaily timer mode On the remote control only Press SleepCleaning the unit MaintenanceHandling discs Handling cassette tapesSpecifications Troubleshooting0603MWMMDWORI

0603MWMMDWORI, LVT1115-003B specifications

The JVC 0603MWMMDWORI, LVT1115-003B is an innovative audio component designed for high fidelity sound reproduction and versatile connectivity. This product showcases JVC's commitment to delivering high-quality audio solutions for both personal and professional applications.

At its core, the 0603MWMMDWORI model features an advanced digital signal processor (DSP) that enhances sound clarity and spatial effects. This technology enables the component to intelligently process audio signals, resulting in a more immersive listening experience. Users can expect rich, detailed sound that's suitable for a variety of genres, from classical to contemporary music.

One of the standout features of the LVT1115-003B is its compatibility with various audio formats, allowing it to decode and play high-resolution audio files. This functionality ensures that music enthusiasts can enjoy their favorite tracks in the highest quality available. Furthermore, the unit supports both wired and wireless connectivity options, making it easy to connect to smartphones, tablets, and other devices.

The design of the JVC 0603MWMMDWORI, LVT1115-003B is sleek and modern, fitting seamlessly into any home or studio environment. With user-friendly controls and a clear display, navigating through playlists and settings is intuitive and straightforward. This model is built with durability in mind, incorporating high-quality materials that can withstand regular use while maintaining a premium aesthetic.

Additional characteristics of this audio component include customizable sound settings that allow users to tailor their listening experience. Whether you prefer a bass-heavy sound profile or a more balanced output, the device offers equalization options to suit individual tastes. Moreover, the inclusion of multiple output channels ensures that it can be integrated easily into a multi-room audio setup.

In summary, the JVC 0603MWMMDWORI, LVT1115-003B is a high-performance audio component that leverages advanced technologies to provide superior sound quality and flexibility. With its robust feature set, elegant design, and commitment to high-resolution audio, this model stands out as a top choice for audiophiles and casual listeners alike.
Top Page Image Contents