JVC UX-QD7W manual Adding a Track to a Group Entry GR, Dividing a Group into Two Groups Divide GR

For the locations of remote control buttons, refer to page 58.

Adding a Track to a Group (ENTRY GR)

You can add a track to the specified group as the last track of the group.

Example: Adding tune F to group 1

Group 1 Group 2

Group 1 Group 2

■While the track which you want to add to a group (track 6 in the example shown above) is being playeds back

1 Press repeatedly to select "ENTRY GR?".

2 Press .

Track number

• You can also select a track number with

,	or the number buttons. Refer to
"Using the number buttons" (		page 17).
3 Press	.

4 Press or to select the group to which you want to add the track.

(Group 1 is selected in the example shown above)

5 Press .

6 Press .

NOTE

•During editing, you can return to the previous step

by pressing . You can quit the editing operation

by pressing .

•If you select a track already belonging to the group, "CANNOT ENTRY!" appears and you cannot proceed to the next step.

Dividing a Group into Two Groups (DIVIDE GR)

Example: Dividing group 1 into two groups

Group 1

Group 1 Group 2

■While the track which you want to specify as the first in the second group (track 4 in the example shown above) is being played back

1 Press repeatedly to select "DIVIDE GR?".

2 Press .

Group number Track number

"G" stands for "GROUP".

•You can also select a track number with

, or the number buttons. Refer to

"Using the number buttons" ( page 17).

•You can also select a group number with

or .

3 Press .

4 Press .

NOTE

•During editing, you can return to the previous step

by pressing . You can quit the editing operation

by pressing .

•If you select the first track in the group or a track not belonging to the group, you cannot proceed to the next step.

•When you divide a group that has a title, the same title is given to both divided sections.

Editing MDs English

64