Acumen RT233 manual Clk, Sleep Mode, WHEEL/ Tire Size, Odometer, Spd, Dst

1 2 1

2

1 2 1

2

1 2 1

CLK

Time is displayed in user-selected 12 or 24 hour formats.

OTHER FEATURES

SLEEP MODE

Computer enters Sleep Mode after 5 minutes without input from any buttons or wheel, and displays the clock only. Computer exits Sleep Mode and returns to the screen last displayed when any button is pressed or the wheel turns.

OROR

22

WHEEL/ TIRE SIZE

2

When the Ride Time (the elapsed time for Service Timer) or the elapsed distance

begins to flash, press & hold 2	to reset to
zero;
OR press 1 to reserve the	digits, and

advance to the next Setup Mode.

Important:

In the Initial Setup, the elapsed time [distance] for Service Timer doesn’t exist.

SERVICE TIMER()

Blinking “ ” alerts rider the Service Time is reached.

TROUBLE SHOOTING

Current speed-reading is erratic or does not appear.

Check the alignment of the bladed spoke magnet and sensor, and the distance between the two components. Realign the magnet and sensor with the spacer.

OR Inspect the wiring for any breaks or kinks. Replace Mounting Bracket and sensor as needed.

Press 2 to toggle between flashing circ (circumference) and tire (tire type). Press 1 to select the desired and advance

the settings.
If pre-set to circ (see Table of Tire Size Vs Circ), press									2 to scroll the flashing digit to the desired number. Press 1 to
select this number and advance to next digit. Repeat this procedure until all four digits are selected.
If pre-set to tire, press 2				to scroll the flashing 700c, 650c, 27in, 26in, 24in, 20in or 16in. Press								1 to select and advance
to next setting to complete the Tire Size. Again, press 2									to scroll and press 1		to finalize the Tire Size and advance to
the next Setup Mode.
		1				2			1
		1				2			1
	2
TIRE SIZE			CIRC		TIRE SIZE			CIRC		TIRE SIZE	CIRC	TIRE SIZE	CIRC
700c x 38mm			2180		700c x 20mm		2074			26” x 2.25”	2115	26” x 1.0”	1913
700c x 35mm			2168		700c Tubular		2130			26” x 2.1”	2095	24” x 1.9/1.95”	1916
700c x 32mm			2155		650c x 23mm		1990			26” x 2.0”	2074	20” x 1.25”	1618
700c x 30mm			2145		650c x 20mm		1945			26” x 1.9/1.95”	2055	16” x 2.0”	1253
700c x 28mm			2136		27” x 1.25”		2161			26” x 1.75”	2035	16” x 1.95”	1257
700c x 25mm			2124		27” x 1.125”		2155			26” x 1.5”	1985	16” x 1.5”	1206
700c x 23mm			2105		26” x 2.3”		2135			26” x 1.25”	1953

ODOMETER

Press 2 to scroll the flashing digit to the desired number. Press 1 to select this number and advance to next digit. Repeat this procedure until all five digits are selected. Press 1 to advance the next Setup Mode. (Maximum setting: 99999)

211

FUNCTIONS

Press 2 to scroll the lower screen Modes.

To enter the NOM Setup Mode, press & hold 1 & 2 simultaneously for 2 seconds when the lowest screen is in the CLK Mode, To reset Ride Data to zero, press & hold 1 and 2 simultaneously for 2 seconds when the lowest screen is in the DST Mode.

SPD

Speed is shown at all times on upper display. It is accurate to 0.1 M/hr or KM/hr and the maximum reading is 139.9 M/hr or 199.9 KM/hr.

DST

DST displays trip distance of	Note: When the Trip Distance
	exceeds	999.9	miles
current ride to a maximum of
	[kilometers],	symbol	“E”
999.9 miles or kilometers. It
	appears indicating that		further
is accurate to 0.1 Mile or

KM. measurement is impossible.

ODO

The odometer displays distance to 99999 Miles or Kilometers. It is accurate to 1.0 Mile or KM.

Incorrect data appears on screen during operation.

Accuracy of the Setup data may be a problem (wheel size setting, etc.).

Data display is extremely slow.

Computer LCD screen operates the best under the following temperature range:

Operating range is: 0 ˚C to 50 ˚C or 32 ˚F to 122 ˚F.

Screen is dark and display erratic characters.

Do not leave the computer in direct sunlight for extended periods of time. Move the computer into the shade until the screen recovers.

Noted: Data will not be affected.

Screen reading is weak or fading.

Symptom of a weak battery. Replace the battery.

Screen readings are erratic and read too high or too low.

Symptom of a weak battery. Replace the battery.

Screen “frozen”, no response to buttons.

Symptom of a weak battery. Replace the battery.

No display whatsoever.

Battery is completely dead, or not installed. Replace or install the battery.

WARRANTY POLICY

ACUMEN INC. WARRANTS ALL VETTA (The Company) PRODUCTS AGAINST MANUFACTURER DEFECTS FOR A PERIOD OF 3 YEARS. Subject to the following limitations, terms and conditions, components will be free of manufacturing defects in materials and workmanship. The 3 year limited warranty is conditioned upon the components being used and operated in normal riding conditions. This warranty does not cover normal wear and tear (i.e. battery replacement, broken wire), rider abuse, acts of God, improper installation or product alteration.

This warranty is void if the components were not purchased (new) from or through an authorized VETTA retailer or dealer. Examples of unauthorized dealers are online auction sites or online retailers.

ACUMEN INC. at its sole discretion will repair or replace items at its own cost. Users are responsible for all freight and shipping charges, when returning items for warranty service.

ACUMEN INC. will pay the freight when returning serviced items, via USPS or UPS to consumers or dealers, once the item(s) has been repaired or replaced.

REQUIREMENTS FOR WARRANTY SERVICING

1.Prior to shipping an item back, you must first obtain a Return Authorization Number (s) (RA#). Each item being returned must have an individual RA#.

2.To obtain an RA #, you must either contact the retailer where the product was originally purchased from, or contact VETTA directly at customer service @ vetta.com.

3.For trouble shooting purposes, we request that the complete unit with packaging be returned to ACUMEN INC. unless otherwise stated by VETTA representative.

ITEMS TO BE INCLUDED IN RETURNS

1.The defective product(s)

2.A letter clearly stating the problem(s) with the returned item(s).

3.Copy of the original sales receipt showing proof of purchase date.

4.The Company is not responsible for loss or additional damages while in transit to ACUMEN INC.

5.Clearly mark the RA# on the outside of the return packaging. All items without an RA # will be refused and returned to the return address on the package.

The Company shall not be held responsible for replacing items with new items for greater than the amount of the original item purchase price. This limited warranty does provide the original owner with certain legal rights and recourse. The original owner may possess other rights or recourse, depending on the state or country. Please check the web to help answer any question and service manual.

ACUMEN INC CUSTOMER SERVICE CENTERS

Acumen Inc.

101A Executive Dr., Suite 100, Sterling, VA 20166, USA.

Acumen Europe BV

Splijtbakweg 117, 1333 HJ, Almere, The Netherlands.

Email: customerservice@vetta.com

Website: www.vetta.com

2