E N G L I S H
Speed Sensor Teaching
The cycling computer has to be coded to the Speed Sensor i.e. taught to receive speed and distance data. This enables exercising in a group without interference from other sensors.
The cycling computer and sensor that come with the product set have already been synchronized but teaching is necessary when you start using a new sensor or if you use other bike settings than Bike 1.
Install the speed sensor to your bike as advised. Before you start teaching, make sure that there are no other speed sensors or cycling computers nearby (40 m / 130 ft). The procedure only takes a few seconds. You can teach one sensor for each bike.
Select Settings > Bike > Bike 1/2/3 > Speed.
Select On/Off and On to turn the speed on. Press OK. Teach new sensor? is displayed.
•Select YES to confirm teaching. Rotate the wheel a few times to activate the sensor. The flashing red light indicates that the sensor is activated. Completed is displayed once the teaching process is over. The cycling computer is now ready to receive speed and distance data.
•Select NO to cancel the teaching. The teaching is cancelled and the cycling computer resumes contact with the previous sensor.
To return to Time mode, press and hold the BACK button.
3