Humminbird 530511-3_A warranty Thank You, Installation Overview, Attaching the Transducer

Page 1

1

Trolling Motor Mounted Transducer

Thank You

Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird® accessories offer the opportunityto upgrade and expand the capabilities of your Humminbird® product.

NOTE: Your transducer may not look exactly like the transducer shown in the illustrations, but it will mount in exactly the same way.

Your Humminbird®accessory is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird® accessory does require repairs, we offer an exclusive Service Policy - free of charge during the first year after purchase, and available at a reasonable rate after the one-year period. For complete details, see the Warranty section included in this manual.

Contact our Customer Resource Center at either 1-800-633-1468or visit our Web site at humminbird.com.

Installation Overview

Following are instructions for the installationof this accessory. Before you start installation, we encourage you to read these instructions carefully in order to get the full benefit from your Humminbird® accessory.

If you find that any items are missing from your installationkit, call our Customer Resource Center at 1-800-633-1468or visit our Web site at humminbird.com.

In addition to the hardware suppliedwith your transducer, you will need various hand tools.

Installation

The trolling motor transducer is designed to mount on the trolling motor of your boat. All hardware needed for installation and operation of this Humminbird® accessory is either included with this accessory or came with your original transducer. The trolling motor mounted transducer allows you to gather sonar information from the point on the boat closest to where you are fishing. It is important that you properly orient the transducer housing in the direction of travel of the trollingmotor, to ensure an accuratedepiction of the terrain under your boat.

The trolling motor mounted transducer will fit any standard trolling motor housing. Some users install this transducer in conjunction with a switch so that the standard transducer can be used for high-speed operation, and the trolling motor transducercan be used while trolling.

1. Attaching the Transducer

WARNING! Before attaching the transducer to the trolling motor, confirm that the motor is disconnected from all sources of electrical power.

CAUTION! Before attaching the transducer to the trolling motor, make sure the trolling motor is properly secured to the boat and will not shift during transducer installation.

1.Position the transducer on the underside of the motor housing. Refer to the illustration that most resembles your accessory, noting any requirementsfor directional bias.

NOTE: Round, circular-bottomed transducers have no directional bias, and therefore orientation of these types of transducers is not as important. Rounded rectangular transducers, however, do have a directional bias, and must be installed as shown in the illustration.

Side View of the Transducer

Transducer should be mounted forward of the motor shaft. Styles of transducer may differ from illustration.

530511-3_A

Trolling Motor Mount Installation

Attaching the Transducer to

the Trolling Motor

NOTE: The transducers shown below

have no directional bias.

NOTE: The transducers shown below have a directional bias, and therefore need to be oriented according to the illustration below.

Cable slots

Temp probe

© 2011 Humminbird®, Eufaula AL, USA. All rights reserved.

Image 1
Contents Installation Installation OverviewThank You Attaching the TransducerTest and Finish the Installation Connecting the CableRouting the Cable Your control head is now ready for operationYear Limited Warranty MaintenanceHumminbird Service Policy Contact Humminbird Returning Your Unit for ServiceFor direct shipping, our address is