Huffy N53 W24700 manual Middle

1. Identify pole sections. MIDDLE

2

1

5"

(13 cm)

TOP

ID Sticker

5"

(13 cm)

3

BOTTOM

ID Sticker

While maintaining alignment, bounce middle pole section (2) into top section (1)

2.using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.

	IMPORTANT!:			NOTE:
				POLE SECTIONS
Align dimple of top pole section (1)				SHOULD HAVE A
				3-1/2" (9 CM)
into trough of middle pole section (2)				MINIMUM OVERLAP.
as shown.				CAUTION!
	pole me	ID		THE IDENTIFICATION STICKER IS
				LOCATED 5" FROM THE END OF
		STICKER
				THE POLE. WHEN PROPERLY
TROUGH			2	POUNDED TOGETHER, THE POLE
				SECTIONS SHOULD HAVE A 3-1/2"
5"				MINIMUM OVERLAP, LEAVING 1-
				1/2" BETWEEN THE OVERLAPPING
		pole middle		POLE AND THE IDENTIFICATION
				STICKER.
		1-1/2"
		DIMPLE	1
		HOLE		WOOD SCRAP
				(NOT SUPPLIED)
P/N 211574	09/04		8