Huffy Portable System manual Should have a

Page 12

3. IMPORTANT! Center alignment slot of middle pole section (5) in a lower hole of top pole section (4) as shown. While maintaining alignment, bounce pole top (4) and middle section (5) together as shown until they no longer move toward taped reference mark. Upright assembly.

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM)

MINIMUM OVERLAP.

WOOD SCRAP

(NOT SUPPLIED)

5

4

4. IMPORTANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce assembly and lower pole section

(6)together as shown until they no longer moved toward taped reference mark.

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM)

MINIMUM OVERLAP.

4

5

6

WOOD SCRAP

(NOT SUPPLIED)

P/N 211022

01/05

12

Image 12
Contents Portable System Before YOU Start U.S.1-800-558-5234 and Canada Warranty Card Safety Instructions Front Parts List See Hardware Identifier Hardware Identifier Bolts Item #7 Item #33 Section a Assemble the Base TOP Pole Middle Pole Bottom Pole Should have a Do not Over 01/05 Identify elevator tubes 43 USE EYE Protection Section B Attach the Backboard 01/05 01/05 Install net clips NET Installation Do not Allow