JVC FS-G6 manual Using Daily Timer, How Daily Timer actually works, After completing the settings

	Continued
5 Rotate MULTI JOG dial (< / > button on the remote	2 Press SET button to call the previous settings for
control also available) to select the minute of the	next timer recording.
timer-off time, then press SET button.	The REC timer indicator lights, and the setting items
	appear one after another in the display window.
	• To erase the recording timer, press CANCEL button
	in this step.

English

6 Rotate MULTI JOG dial (< / > button on the remote control also available) to select either “TUNER FM” or “TUNER AM,” then press SET button.

7 Rotate MULTI JOG dial (< / > button on the remote control also available) to select a preset channel, then press SET button.

Using Daily Timer

With Daily Timer, you can wake up on your favorite music or radio program.

•You can set the daily timer whether the system is turned on or off.

“TAPE REC” follows in the display window as selected recording media, unless any MD recorder connected.

•If XM-G6 MD recorder connected, you can select either a tape or an MD as recording media.

8 Press SET button to select recording media, and turn off the system.

How Daily Timer actually works

The system automatically turns on, and starts playing the specified source when the timer-on time comes. Then, when the timer-off time comes, the system automatically turns off (standby).

The timer settings remain stored in memory until you reset them or disconnect the AC power cord.

1 Press CLOCK/TIMER button repeatedly until “DAILY TIMER” and its timer-on time appear.

•Each time you press the button, the timer mode changes as follows:

After completing the settings...

The REC timer indicator lights and the setting items appear one after another in the display window. Thus the Recording Timer is

(canceled) DAILY TIMER

DAILY TIMER ON AM 12:00

ready for unattended recording.

REC

REC timer indicator

After a timer recording is complete...

Set the volume to an appropriate listening level.

If you press a certain button while Recording

Timer is operating

Recording will stop.

To use the same Recording Timer settings repeatedly

Once you have set the recording timer, it remains stored in memory until you change it.

To activate the recording timer with the previous settings, follow the procedure below:

1 Press CLOCK/TIMER button repeatedly until “REC TIMER” appears in the display window.

REC TIMER

ClockREC TIMER

ON AM 12:00

2 Rotate MULTI JOG dial (< / > button on the remote control also available) to select the hour of the timer- on time, then press SET button.

3 Rotate MULTI JOG dial (< / > button on the remote control also available) to select the minute of the timer-on time, then press SET button.

26