JVC LET0070-002A manual About the track marks, Things to Know Before You Start Recording, Possible

Page 36

Things to Know Before You Start Recording ——————————————

It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic embodied therein.

Press the DOLBY B NR button — the indicator lights up — to reduce tape hiss.

When you record onto partially recorded MD, its contents are not erased or overwritten. The recording starts from the point following the last recorded track of the MD.

If you want to record such an MD from the beginning, you have to erase its contents first (see “ALL ERASE Function” on page 48).

When recording a source using the Standard Recording (see page 34), you can also record the same source on a tape using the Standard Recording procedure for the Cassette Deck (see page 55).

The recording level is automatically set correctly, so it is not affected by the VOLUME control. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

When recording, you can hear Sound Modes through the speakers or headphones. However, the sound is recorded without Sound Modes (see page 9).

To avoid erasing important recordings

Recordable MDs have an accidentally erasure prevention tab so that important recordings are not accidentally erased. When you finish recording or editing, slide open the erasure prevention tab on the cartridge side surface. New recording or editing is now no longer possible. To redo recording or editing, return the tab to the closed position.

Erasure prevention tab

Recording/Editing

Disc protected:

Recording/Editing not

possible

possible

 

About the track marks

When playing an MD, you can move among the tracks using the

or

button or even select directly a

track using the Remote Control.

 

 

You can do that because there is a mark recorded at the front of each track enabling you to locate the track. This mark is called a “track mark” and the portion between two adjacent track marks is called a “track”.

When recording from a digital source such as the CD Player, a track mark is recorded automatically at the beginning of each track.

When recording from a analog source such as the radio, no track mark is recorded. This means that, when playing this MD, the MD Recorder will regard the entire recording as one track (track 1). You will not be able to select directly a song or navigate through them.

You can put track marks manually.

To put a track mark manually, during the recording, press the SET button at the place you want to put a track mark.

The MD Recorder will also consider a blank of 3 seconds or more as a blank separating 2 tracks and consequently put a track mark.

Note:

To add track mark afterwards (when the recording is over), you can use the DIVIDE function (see page 42) to divide a long recording.

33

Image 36
Contents CA-MD9R If in Doubt Consult a Competent Electrician Class Laser Product Features How This Manual Is OrganizedTable of Contents Accessories How to Put Batteries in the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM MW/LW AntennaUsing the Supplied FM Antenna Using the Coaxial Type Connector Not SuppliedConnecting an External Component To the audio output jacksDemo Mode On the Remote ControlOne Touch Operation To stop the Demo, press any buttonUsing the Amplifier Turning the Power On and OffMulti JOG dial Press ButtonAdjusting the Volume Reinforcing the Bass SoundMuting Function For private listeningSelecting a Sound Mode Sound ModesLive surround modes A. effect modesUsing an External Component Creating Your Own Customized Sound ModePress the AUX button on the unit or on the Remote Control Listening to an External ComponentUsing the Tuner Tuning in a StationPress the Tuner button on the unit Presetting Stations Using the unitSelecting a Radio Station Changing the FM Reception Mode Receiving FM Stations with RDSWhat Information RDS Can Provide Description of the PTY codes R. MChanging the RDS Information Searching for Programs by PTY Codes PTY SearchEON Function Press the EON ON/OFF buttonNews News You have selectedAlarm Function Test FunctionUsing the CD Player CD indicators on the unitCD indicators on the display Using the CD Player Power comes on, and operations are done automaticallyLoading CDs Place a CD, with its label side up, onto the trayPlaying CDs Changing CDs while PlayingPlaying order of CDs Locating a Track with the Remote Control Directly Programing the Playing Order of the TracksSelecting a Track Selecting a Passage within a Track on the unit onlyCD 2. Press the CD button on the Remote Control Press one of the CD buttons 1 to 3 to select a CDTrack Step Number Rotate the Multi JOG dial to select a trackChecking the Program Changing the ProgramPress one of the Disc buttons 1 to Press the number buttons to select the tracksIndicator appears on the display Random PlayRepeating a Selection or CDs Press the CD Repeat button on the unitUsing the MD Recorder Playing MD indicator on the unitMD indicators on the display Stop Ü / 8 Play/PauseUsing the MD Recorder Loading MDsPress the 0button to the right of the MD loading slots Press the 0button to close the loading slot coverPlaying MDs Changing MDs While PlayingPlaying order of MDs Press the 0 buttonSelecting a Passage within a Track on the unit only Press the MD buttonPress one of the MD buttons 1 to 3 to select an MD Track Step Number numberMD Track Step number number number To stop playing, press the 7buttonRepeating a Selection or MDs Listening About the track marks Things to Know Before You Start RecordingTo avoid erasing important recordings Erasure prevention tab Recording/EditingChanging the Display Mode Standard RecordingPress the Ü/ 8button to start the recording To stop recording, press the 7 buttonLong Recording Long REC One Touch CD Recording CD REC Prepare CDs and a recordable MD into the MD1 loading slotPress the CD REC button on the MD Recorder DISPLAYChanging the Display Mode Three CD Recording Triple RECPrepare CDs and recordable MDs Listening Edit Recording Listening Press the Listening buttonTo skip the current track, press the Skip button Repeat to program other tracksTo stop recording, press the 7button First Track Recording 1ST Track REC Prepare CDs, and a recordable MD into the MD1 loading slotPress the 1ST Track REC button Replace the CDs on the trays not selectedUsing the MD Recorder Editing Divide Function Press the Ü/ 8buttonShifted position Press the Edit buttonTotal track number increases Press the 0 button to eject the MDJoin Function Two adjacent tracks selectedTotal track number decreases Press the 0button to eject the MDEx. When you want to move the track Move FunctionEdit Ex. When you want to erase track Erase FunctionTrack number to be erased ALL Erase Function Erasing a Portion of a TrackAll track numbers disappear Erase the middle portionLetters and symbols Title FunctionGiving a Title to an MD Repeat steps 5 to 7 to enter up to 32 charactersGiving a Title to a Track Changing the TitleSelected track number appears Follow steps 4 to 10Using the Cassette Deck Playing Tape Direction Indicator on the unitRegular Play One Touch PlayFast Left and Fast Right Other Useful Features of the Cassette Deck Music ScanFinding the Beginning of the Current Selection Finding the Beginning of the Next SelectionUsing the Cassette Deck Recording ÜPlay StopPosition 1 the normal mode to position CD Direct Recording Prepare CDs. SeeInsert a blank or erasable cassette in the cassette holder Press the CD REC buttonUsing the Timers Setting the ClockMinute digits starts flashing on the display Setting the Daily Timer Set the time you want the unit to turn onSet the time you want the unit to turn off Set the Volume Level Select the source you want to listen toDisplay Turning the Daily Timer On and Off To change the Daily Timer settingBefore Turning Off the unit Setting the Recording Timer Procedure for Setting the Recording TimerOn the display Set the time you want the unit to be turned onTurning the Recording Timer On and Off SET4. Select a preset station you want to recordPress to turn the power off if necessary To change the recording timer settingSetting the Sleep Timer Procedure for Setting the Sleep TimerTo change the Sleep Timer setting To cancel the Sleep Timer settingTimer Priority Disc Lock Function Locking the DiscsUnlocking the Discs PressCare and Maintenance Troubleshooting SymptomPossible Cause Action MD Error Messages Specifications Utoc User Table Of Contents Additional InformationsSome Words about MDs Atrac Adaptive TRansform Acoustic CodingNormally When vibrated Serial Copy Management System ScmsSound Skip Guard Memory JVC 0398TTMMDWSAN

LET0070-002A specifications

The JVC LET0070-002A is a high-performance television that combines cutting-edge technologies with sleek design, making it an ideal choice for those seeking an immersive viewing experience. One of the standout features of the LET0070-002A is its impressive display quality. Featuring a 70-inch screen with 4K Ultra HD resolution, the television delivers stunning images with remarkable detail and clarity. Whether you’re watching your favorite movies, series, or playing video games, you’ll appreciate the vibrant colors and deep contrasts that bring content to life.

In terms of technology, the JVC LET0070-002A boasts a direct-lit LED panel, which enhances brightness levels while ensuring better energy efficiency. This technology allows for improved color accuracy and contrast ratios, offering viewers a more dynamic and engaging experience. Additionally, the incorporation of HDR (High Dynamic Range) support further elevates this television's capabilities, enabling it to display a wider range of colors and brightness levels, ensuring that both the brightest and darkest scenes are rendered with brilliance.

The LET0070-002A is equipped with smart TV features, powered by a user-friendly interface that allows easy navigation through various streaming services and apps. With built-in Wi-Fi connectivity, users can access popular platforms such as Netflix, YouTube, and Hulu without the need for additional devices. The television also includes voice control compatibility, allowing for hands-free operation and enhanced convenience.

When it comes to audio performance, the JVC LET0070-002A features advanced sound technologies that deliver a cinematic audio experience. The television is equipped with speakers that produce clear dialogue and rich sound quality, ensuring an enjoyable auditory experience that complements its stunning visuals.

Connectivity options are abundant on the LET0070-002A, with multiple HDMI ports, USB inputs, and an optical audio output, making it easy to connect external devices such as gaming consoles, soundbars, and other multimedia accessories. The TV's elegant design, coupled with its ultra-thin bezels, makes it a stylish addition to any living space, seamlessly blending functionality with aesthetics.

Overall, the JVC LET0070-002A stands out in the crowded television market, offering a perfect combination of advanced features, superb display technology, and user-friendly functionalities, making it a top contender for anyone looking to upgrade their home entertainment setup.