The Wireless Remote, which you can attach any
You must aim the Wireless Remote at the Disk Launcher in order for it to function.
Mount the Wireless Remote onto the blaster rail by sliding and locking it into place.
GAME PLAY
Turn the Disk Launcher ON. The ON switch is locatedat the bottom front of the Disk Launcher.
You will hear a single tone, and the lights on the Launcher will light up.
When you play with this product, it is recommended that you stand at least 8 to 12 feet away from the Disk Launcher.
The Disk Launcher has two height settings, to control how high it launches the Disks: the low setting is up to 7 feet (2.1 meters); and the high setting is up to 9 feet (2.7 meters). The default setting is low. Take note of the ceiling height in the room you're playingin, and set the launch height accordingly.
To change the height setting, press the Height Adjustment button on the front of the Disk Launcher. The top light indicatesthe high
setting; tha bottom light, the low setting. To return to the default setting, pressthe button again. 
TO LOAD W E BLASER
1.Insert a dart into the barrel of the blaster.
2.Pull back the cocking mechanism.
3.Pull the trigger to fire.
4.Repeat steps I and 2 with darts from the blaster's storage compartment.