25. Support pole on sawhorse. Attach backboard assembly to top pole section (1). Then install pole cap (41). NOTE: Two people are recommended for this step. Use caution; elevator assembly is heavy.
| 38 |
| 40 |
| 35 |
1 | 41 |
| |
| 40 |
| 35 |
| 36 |
26. Install handle assembly to lower elevator | 27. | Insert bolt (36) through the left side of the upper |
elevator tube (40), then stretch spring (42) onto bolt | ||
tubes (35) using bolt (36), spacers (37), |
| (36). Insert bolt (36) through the right side of the upper |
and nut (38). NOTE: Before going onto |
| |
| elevator tube (40) and secure with nut (38). | |
the next step, set adjustment system to |
| |
|
| |
the 10’ (3.05m) setting. |
| WARNING! |
|
| |
|
| USE EYE PROTECTION |
|
| WHEN INSTALLING |
|
| SPRINGS. |
38
40
36
37 | 35 |
38
40
36
35 | 42 |
|
P/N 211948C 01/04 | 22 |