1.
Correctly identify the pole sections. Line up holes as shown and tap together.
NOTE: Make sure holes remain lined up. Secure poles as shown.
3
| 2 |
|
| 10 |
|
9 |
| 9 |
9 | 13 | 9 |
|
10
13
1
Attach legs to ple assembly using bolts (8) and
2. nuts (13). Attach rim and board bracket to backboard using bolts (11) and nuts (20).
11
9
17
15
20
14
Slide backboard assembly over top pole as
3. shown fully tightening bolts (11) and nuts (20). Secure board by inserting screws (6) as shown.
REAR
POSITION OF BACKBOARD
9
NOTE:
Do not
completely tighten bolt
(11)and nut
(20)until step 3 is completed
WARNING
TOP OF ALL LEGS
MUST LINE UP, OR IT
MAY TIP OVER.
NOTE:
Hole pattern on legs
(4)& (5) are different. Use correct legs.
6
Install net (16) to rim (17) as shown.
13
5
9
12
7
9
4
5
9
13
4
9
12
8
17
16
P/N 211745 | 12/04 | 2 | |
|
http://www.huffysports.com