3.Install rod (8) through holes in bottom pole section
(7) and eyebolt (9).
9 
7
8
4.Install wheel axle (2) through wheel carriage (10). Install wheels (3) onto wheel axle
(2) with spacers (11) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (7) to tank and wheel bracket as shown, a deep socket is recommended. IMPORTANT! DO NOT OVER TIGHTEN.
11 |
3 |
10 |
2 |
11 |
3 |
IMPORTANT!:
THE SPACER (11) WILL |
|
FIT LOOSELY UNTIL |
|
SECURED INTO THE | WARNING! |
CAVITY OF THE BASE |
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY DAMAGE.
7 |
8 |
9 |
12 |
P/N 211696 | 07/03 | 12 |