SEA-TOUCH
*
27° THERMOMETER
1 sec. |
Activate glass | Thermometer display |
27° GLOSSARY > THERMOMETER
Description of function |
| |
In thermometer mode, your | T˚ | |
displays the ambient temperature. | ||
| ||
Explanations |
| |
The temperature displayed corresponds to |
| |
that of the watch case, so this temperature | T˚ | |
is influenced by your body temperature. That | ||
| ||
is why the temperature displayed may differ |
| |
from the ambient temperature. | T˚ | |
To display the actual ambient temperature, | ||
| ||
the watch needs to be taken off for 15 to |
|
30 minutes, in order to be free from the influence of body temperature. Under water the thermometer will show you the water temperature. The body temperature will not influence this measure. However the watch will need a few minutes to adapt from the air temperature to the water tempera- ture when going into the water.
Characteristics of function
The temperature can be displayed in degrees Celsius [°C] or degrees Fahren- heit [°F]. (See procedure to follow for changing units on page 5).
Conversion formulae: | T 0C = (T 0F – 32) x 5/9 |
| T 0F = T 0C x 9/5 + 32 |
|
|
Measurement range: | – 5°C to + 55°C / 23°F to 130°F |
|
|
Accuracy: | ± 1°C / ± 1.8°F |
|
|
Resolution: | 1°C / 1°F |
|
|
DIVE > MANUAL START & STOP
Start
1 sec. | 5 sec. |
Activate glass | Dive display | Start Dive manually | LCD check - hands in | Dive mode active - elapsed time |
(outside of water) |
|
| zero position for depth | in LCD, minutes hand shows |
|
|
| and dive speed | depth in meters or feet on bezel, |
|
|
|
| hours hand shows dive speed |
|
|
|
| in m/min or ft/min on dial |
Stop
1 sec.
Only above depth limit 1m40:
-Short pressure on center
-Long pressure on center
w w w. t i s s o t . c h | 9/12 | 1 4 5 _ E N |