Triax SR927W, SR920W manual How to Read the Hands

Page 8

CHRONOGRAPH (Super) • STOP Watch (Regular)

In CHRO and CHRO .01 modes, the hands indicate different time units depending on the mode in

use and the elapsed time.

 

 

START/

 

 

 

 

 

 

How to Read the Hands

STOP

• After 1 hour, the 24-hour hand

 

 

 

indicates the elapsed hours

LAP/

 

 

 

 

• After 10 minutes have elapsed, the

R E S ET

 

 

 

1/10 second hand pauses at the 12

 

 

 

o’clock position while the second and

 

 

 

minute hands are moving

 

 

 

• When the measurement is stopped or lap time is measured, the 1/10 second hand indicates the 1/10 seconds measured

• When the measurement is restarted or lap time measurement is released, the 1/10 second hand returns to rest at the 12 o’clock position

START/ STOP

LAP/

R E S ET

ENG

9

Image 8
Contents Super Regular Super RegularTime Armored Triax Super Watch Diagram Armored Triax Regular Watch Diagram Time How to Read the Calendar How to Set the Calendar 1. Pull the crown C outChro mode Chronograph Super Stop Watch RegularHow to Read the Hands How to Read the Hands Measurement of less than 10 Minutes 100 .01 second Chronograph Super only100 .01 second Chronograph Super only Demonstration Timer Regular only Setting and Using the TimerAlarm Time Setting To Engage the AlarmTo Disengage the Alarm Alarm Sound TestAdjusting the Hand Position Super Adjusting the Hand Position Regular Specifications Super