Coleman 2000007832 manual Extend the Tent Frame, Verify Connections, Between Tent, Frame Poles

		TENT SETUP INSTRUCTIONS
				MODEL 2000007832
Before you begin
t Read all instructions before set up.
t Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
	WARNING: Keep clear of overhead power lines.
t Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
t Secure with all stakes and guylines provided to prevent property
damage or personal injury.
t For best results in windy conditions, position narrow end of tent
into the wind.
t Do not drop tent.				Fig. 6
t Do not bounce tent bag on its end to remove tent, as these
actions may damage the frame.
t THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
t Under no circumstances should this product be used to cover
automobiles, marine products or similar items.
CAUTION: Avoid pinch points when opening and closing the
tent frame.
	Extend the Tent Frame
1 t top.Stand(Fig.the1)tent upright with the hub assembly at the
	t Unfold the arms of the tent downward until they lay flat on
	the ground. (Fig. 2)		3	Fig. 5
STITCHLINE				Verify Connections
				between Tent and
				Frame Poles
				t Verify the clips along the edges of the tent are properly
				attached to the frame poles. (Fig. 7 and Fig. 8)
2	Fig. 1	Fig. 2
	Raise the Tent
	t Unfold the arm joints located	at each of the tent corners.
	The tent will raise as the leg	poles are extended.
	(Fig. 3 and 4)
	t Extend each of the telescoping leg poles until they snap
	into place. (Fig. 5 and 6)

Fig. 7

Pole

Clip

Fig. 4

Fig. 3

Fig. 8

(continued on other side)