| Tyl™ X2 | |
| part number | |
POLE ASSEMBLY PARTS |
| |
Main Tent Poles (Silver) | Rainfly | |
Part No. | Part No. | |
Brow Pole |
| |
Part No. |
| |
Layout & Positioning | Attach center of the tent to the poles | |
| ||
1 of Tent, Pole Assembly | Toggle & Loop | |
– Layout and position tent with door facing | ||
| ||
desired direction. (illus. 1) |
| |
– For best results in windy conditions, position |
| |
door or back of tent into the wind. |
| |
– Unzip door. |
| |
– Stake down tent corners. Keep the floor |
| |
taut. (illus. 2) | illus. 1 | |
– Assemble Frame Poles by interlocking the | ||
| ||
| ||
long silver poles. | illus. 2 | |
– Lay the poles out diagonally, centered on the | ||
tent.The center of the poles should cross | Tent stake | |
forming an “X” in the middle of tent. (illus. 1) | through Loop | |
| ||
– Fasten toggle & loop on top of tent over both |
| |
poles. (illus. 1), (illus. 3) |
| |
Connect Frame to Tent | illus. 3 | |
Toggle & Loop | ||
2 – Insert one pole tip into the grommet on the | ||
| ||
webbing located at the corners of the tent (illus. 4). |
| |
– Go to opposite end of the same pole and |
| |
gradually apply pressure to the pole, forming an |
| |
arch, until you are able to insert the pole tip |
| |
into the grommet. |
| |
– Repeat for second pole. |
| |
illus.4 |
| |
Insert Pole Talon on |
| |
stake loop into pole. |
| |
illus. 5 | Tent frame up |