Coleman 9271-141 owner manual 14’x14’ 3 Room Dome Tent, Layout & Positioning, Tent, Pole Assembly

14’x14’ 3 Room Dome Tent

Instructions apply to Part Number 9271-141

When You Are Ready To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees. –For best results in windy conditions,

position the end of tent into the wind. –See owners manual for more tips.

Part No. 9271-402

Center Tent

Poles

Part No. 9271-405

Side Tent

Poles

Part No. 9271-403

Rainfly Pole

Rainfly Part No. 9271-406

Layout & Positioning
1 of Tent, Pole Assembly
	Side pole
–Layout and position tent with doors
facing desired direction. (illus. 1)
–Stake down tent corners, using
the tent stake loops.
Keep the floor taut.(illus. 2)
–Assemble all poles by interlocking
		Door
shock-corded poles.
–Insert the longer Center Frame Poles into
Center Pole Sleeves. The poles should cross
forming an “X” in the middle of tent. (illus. 1)
–Insert the shorter Side Frame Poles through the pole
sleeves located at the sides of tent. (illus. 1)

illus. 1

Center poles

Side pole

Door

illus. 2 Tent

stake through stake loop

2	Connect Frame to Tent
	–Unzip doors.	Sidepole
	–Locate the Pin & Ring Systems on
	either side of the front doors and the
	corresponding Pin & Ring on the
	back side of tent.
	–Insert one end of Frame Pole onto
	Pin & Ring System on tent stake
	loop on either side of the doors. (illus. 3)
	–Go to opposite end of pole diagonally
	from starting point and gradually
	apply pressure to the pole forming an
	arch until you are able to insert the
	Pin into pole end.
	–Repeat for second pole.
	–Attach tent frame clips to poles.

Center poles

Sidepole

illus. 4

Center section upright

illus. 3

Ring & Pin System