Coleman 2000012456 manual Raise the Tent, Extend the Tent Frame, Stake the Tent

STITCH LINE

	tent setup instructions
		2	MODEL 2000012456
Before you begin			Raise the Tent
• Read all instructions before set up.			• Extend each of the telescoping leg poles until they snap
• Select a level site clear of rocks, branches, and other hard or
			into place. The tent will raise as the leg poles are extended.
sharp objects, to install your tent.
			(Fig. 5)
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential lightning			Lock Button
strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of tent
into the wind.
• Do not drop tent.
• Do not bounce tent bag on its end to remove tent, as these
actions may damage the frame.
• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO		Fig. 5
PEOPLE TO ASSEMBLE.
• Under no circumstances should this product be used to cover
automobiles, marine products or similar items.
CAUTION: Avoid pinch points when opening and closing the
tent frame.
1	Extend the Tent Frame		Verify Connections and
	bottom. (Fig. 1)		Stake the Tent
	• Stand the tent upright with the hub assembly at the	3 • Verify the clips along the edges of the tent are properly
	• Unfold the arms of the tent downward from the center until
	they lay flat on the ground. (Fig. 2)		attached to the frame poles. (Fig. 6)
	• Unfold the ridge pole. (Fig. 3)		• Insert the tips of ridge pole into pockets. (Fig. 7)
			• Secure the tent by driving stakes through the webbing
			loops sewn to the tent base. (Fig. 8)
		Pocket		Clip

Pole

Ridge

Pole

Fig. 1	Fig. 7
	Fig. 6

Fig. 3 Fig. 4

		Tent Pole	Stake
		Webbing	Fig. 8
Fig. 2	Ridge Pole	Loop
			(continued on other side)