Coleman 2000005799 manual Attach Tent to Leg Poles, Using Clips, Attach Rainfly

STITCH LINE

TENT SETUP INSTRUCTIONS

MODEL 2000005799

Before you begin	2	Connect Leg Poles
Read all instructions before set up.		•	Insert top poles and leg poles into pole connectors.
• Select a level site clear of rocks, branches, and other hard
			(Fig. 3, Fig. 4 and 5)
or sharp objects, to install your tent.		•
WARNING: Keep clear of overhead power lines.			Insert one pin into each leg pole. (Fig.6)
• Do not set up your tent under trees because of potential			Pole Connector
lightning strikes or falling tree limbs in inclement weather.

•Secure with all stakes and guylines provided to prevent property damage or personal injury.

•For best results in windy conditions, position narrow end

of tent into the wind.
• Enlist the help of at least one other person to assist you
when it is time to assemble the tent.										Pole
Pole Descriptions										Pole
No.		Description		Qty.	Pole	Pole
					Repair Kit	Replacement Kit		Fig. 5			Fig. 4
1		Main Roof Pole, grey		2	5010000539	5010000549
2		Side Roof Pole, black		2	5010000539	5010000549
		w/Red mark
3		Side Roof Pole, black		2	5010000540	5010000548
		w/Yellow mark
4		Front & Rear Roof Pole, black		2	5010000540	5010000548
		w/Green mark
5		Center Steel Leg Pole		4	N/A	5010000753
		w/ red mark
6		Side Steel Leg Pole		4	N/A	5010000761
		Layout & Positioning									5
1 of Tent and Poles								6		Fig. 3
										Pole
•	Layout and position the tent with door facing desired direction. (Fig. 1)
•	Stake down tent corners first through the stake rings. (Fig. 2)
•	Keep the floor taut.									Pin
•	Stake down the remainder of the stake rings.
•	Assemble all poles by unfolding and interlocking the shock-corded
	pole sections.
•	Insert the body poles into the pole sleeves.
				4				Fig. 6		Clip	Fig. 7
						1	3	Attach Tent to Leg Poles
						3		Using Clips
								•	Attach clips along the edges of tent to leg poles. (Fig. 7)
								•	Make any adjustments to the tent stakes, if needed.
		Pole	Fig. 1			2	4	Attach Rainfly
		Sleeve
								•	Drape rainfly over tent. (Fig. 9)
		Tent Stake
								•	Connect the elastic loops with “S” hooks, (found at the rainfly
									corners) to the frame poles. (Fig. 10)
								•	Secure rainfly with straps located on the underside of
					Stake Ring				rainfly. (Fig. 11)
								•	Attach and stake out guylines. (Fig. 9)
								HINT: During setup, keep door zipped to keep proper tension on
									fabric.
			Fig. 2							(continued on other side)