Gas Cooktop Installation | 9 |
wolfappliance.com/specs
Installation Requirements
Failure to locate the cooktop without the proper clear- ances will result in a fire hazard.
IMPORTANT NOTE: Caution must be used in planning the proper installation of the Wolf gas cooktop to avoid fires or damage to adjacent cabinetry or kitchen equipment.
Follow all minimum clearances to combustible surfaces shown in the installation illustration for your specific model.
There should be at least 51/2" (140) clearance between the countertop and any combustible surface directly below the gas cooktop.
Wolf gas cooktops are intended for indoor use. An adequate supply of fresh air is required to assure proper combustion and ventilation. The location of the cooktop should be away from strong draft areas, such as windows, doors and strong heating vents or fans. Do not obstruct the flow of air.
It is recommended that you use a Wolf cooktop ventilation hood, pro hood or hood liner with the Wolf gas cooktop. Refer to the Wolf ventilation guide.
MULTIPLE COOKTOP INSTALLATION
If the gas cooktop is to be used with any combination of additional cooktops or modules with a filler strip, the dimensions provided in the chart are derived by adding
11/4" (32) additional space for each additional unit, to give you the total countertop
IMPORTANT NOTE: When multiple cooktops are installed side by side, each unit must have its own separate recom- mended electrical circuit. When multiple gas cooktops are installed next to one another, they can receive their gas supply from a common line. However, each unit must have its own gas pressure regulator.
Multiple Cooktops
COUNTERTOP | WIDTH | |
2 Modules | 291/4" (743) | |
3 Modules | 441/2" (1130) | |
4 Modules | 593/4" (1518) | |
30" (762) | Cooktop / Module | 441/4" (1124) |
30" (762) | Cooktop / 2 Modules | 591/2" (1511) |
36" (914) | Cooktop / Module | 501/4" (1276) |
|
|
|