JVC MX-KA5JW manual Standard Recording, Tape to Tape Recording DUB- Bing, CD Synchro Recording

Page 21

Using the Cassette Deck (Recording)

English

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with this procedure.

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in Deck B.

1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

2 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

3 Press the CD REC START button on the Unit.

“CD REC” appears on the display and the “REC” indicator lights up. Then, the System begins CD Synchro Recording and the tracks on the CD are recorded on the tape.

When recording of the tracks of all CDs is finished, “CD REC FINISHED” scrolls on the display and the CD Player and Cas- sette Deck stop.

(Recording start)

(When finished)

CD REC

START

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “NO REC” will appear on the display.

•After the CD Player has played the entire CD or all the pro- grammed tracks, the tape automatically stops.

To stop at any time during the recording process, press the REC START/STOP button on the Unit or the 7 button. “CD REC FINISHED” scrolls on the display and the CD Player and Cassette Deck stop.

Tape travelling direction

2 Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

•For CD recording, see “CD Synchro Recording” mentioned below.

•For dubbing, see “Tape to Tape Recording (DUBBING)” described below.

3 Press the REC START/STOP button on the Unit.

The “REC” indicator lights up and the System begins record- ing.

The Tape indicator (3) blinks on the display.

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “NO REC” will appear on the display.

To stop during recording, press the REC START/STOP but- ton on the Unit, or press the 7 button.

Recording an AM Station to Tape (Beat Cut)

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, press the PROGRAM button on the Unit to eliminate the beats.

1 Set to AM station and start recording.

2 Press the PROGRAM button on the Unit to eliminate the beats.

Each time you press the button, the display changes as shown below:

CUT 1= CUT 2 = (back to the beginning)

•When making SLEEP timer settings while doing CD Syn- chro recording, set enough time to allow for the CD to fin- ish playing, otherwise the power will go off before recording is completed.

Tape to Tape Recording (DUB- BING)

Recording from one tape to another is called dubbing. You can dub tapes simply, with just a single button.

1 Press the TAPE3 button, and then press the

7button.

2 Insert the source cassette you want to copy from into Deck A for playback.

3 Insert a blank or erasable cassette you want to copy onto into Deck B for recording.

4 Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously and the “REC” indicator lights up.

During dubbing, the Deck indicators “A” and “B” light up al- ternately.

•If no tape is inserted into Deck A, “NO TAPE” will appear on the display.

•If no tape is inserted into Deck B, “NO TAPE” will appear on the display.

To stop dubbing, press the REC START/STOP button on the Unit or the 7 button.

CD Synchro Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.

1 Prepare CDs. (See page 12.)

Press the CD1-3 button (that you want to make recording), and then press the 7 button.

•If you want to record specific tracks only, you need to pro- gram the tracks beforehand. (See page 14.)

•If you want to record one CD only, you need to load one CD only.

•During dubbing, you can hear sound effects through the speakers or headphones. However, the sound is dubbed without sound effects.

18

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MX-KA5 Avisos, precauciones y otras notas No obstruya las rendijas o los orificios de ventilación Precaución el aparato debe estar bien ventiladoFeatures IntroductionHow This Manual Is Organized Table of Contents How To Put Batteries In the Remote Control AccessoriesUsing the Remote Control Getting StartedUsing the Supplied Wire Antenna Connecting the FM AntennaUsing an FM 75-Ohm Antenna Cable not Supplied Outdoor FM antenna cable not suppliedConnecting the Speakers Connecting the AM AntennaRear Panel of the Unit Right side rear viewConnecting to the Wall Outlet Connecting External EquipmentDemo Mode Compu PlayTurning the Power On and Off Adjusting the VolumeBasic Operations Selecting the Sound Mode Entering the Number with the Remote Control Numeric KeysFade-out Muting Fade Muting Reinforcing the Bass Sound Active Bass EXTuning In a Station Using the TunerSelect a station using one of the following methods One Touch RadioTo Change the FM Reception Mode Presetting StationsUsing the Unit Press the 4 or ¢ button to select the preset numberUsing the CD Player About the Disc IndicatorDisc Number indicator Lights all the time To Load CDs To Unload CDsExample of indication One Touch PlayNormal Play Basics of Using the CD PlayerTo Play CDs To Select a TrackTo Make a Program Programming the Playing Order of the TracksTo Play the Program You Have Made To Exit and Re-enter Program PlayRepeating Tracks Random Play Tray Lock FunctionLocking the Tray Unlocking the TrayTo Fast-Wind a Tape Playing a TapeClose the cassette holder gently Press the Tape 3buttonTape indicator Deck indicators REC indicator Using the Cassette Deck RecordingThings To Know Before You Start Recording Adhesive tapeTape to Tape Recording DUB- Bing Standard RecordingCD Synchro Recording To Record Any Sound Source to TapeListening to the External Equipment Using an External EquipmentSetting the Clock Using the TimersPress the CLOCK/TIMER button Press the 4or ¢button to set the hourSetting the OFF time Example PM Setting the Daily TimerSetting the on time Example AM Selecting the music sourceTurning the Daily Timer On and Off Setting the REC Recording TimerSetting the volume level Press the SET button on the UnitSetting the on time you want the System to turn on Turning the REC Recording Timer On and OffSetting the OFF time you want the System to turn off Select the preset station for recordingTimer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsCare And Maintenance Specifications TroubleshootingEN, SP 0303NYMCREBET Victor Company of JAPAN, Limited

MX-KA5JW specifications

The JVC MX-KA5JW is a multifaceted home audio system that embodies the fusion of style and technology, offering an impressive array of features to cater to the modern music lover. This model is particularly notable for its powerful sound output and versatility, making it suitable for both casual listening and more intense audio experiences.

One of the standout features of the JVC MX-KA5JW is its robust amplification system, designed to deliver high-quality audio across a broad frequency range. With a 2-channel configuration, the system provides an immersive soundstage, ensuring that users can enjoy clear highs and deep bass tones. The incorporation of a dedicated subwoofer enhances the low-end response, making it ideal for music genres that emphasize bass, such as hip-hop and electronic.

Another highlight of the MX-KA5JW is its CD player, which permits playback of both standard CDs and CD-R/RW formats. This feature appeals to those who have a collection of physical media and prefer the richer sound that CDs can deliver. Additionally, the system includes a built-in AM/FM tuner, allowing users to listen to their favorite radio stations, expanding the audio options beyond merely streaming or physical media.

Connectivity is a key aspect of the JVC MX-KA5JW. Equipped with multiple inputs, including aux and USB ports, this home audio system can easily connect to various devices, such as smartphones, tablets, and laptops. This versatility extends to Bluetooth capabilities, enabling wireless streaming from compatible devices. This feature is especially useful for users who wish to enjoy their music library or streaming services without the hassle of cables.

The design of the MX-KA5JW is both sleek and functional, with an aesthetically pleasing appearance that can complement any living space. The front-facing controls and display make it user-friendly, allowing for easy navigation through different audio sources and settings.

In terms of audio effects, the JVC MX-KA5JW features preset equalizer settings, enabling users to tailor the sound to their preferences or the specifics of their music genre. This personalization further enhances the listening experience, making it more enjoyable for everyone.

In summary, the JVC MX-KA5JW represents an excellent choice for those seeking a powerful and versatile audio solution. With its robust amplification, CD playback, FM/AM radio, and extensive connectivity options, it caters to various listening preferences while maintaining a stylish design for any home environment. Whether it's for hosting a party or enjoying a quiet evening at home, the MX-KA5JW stands out as a reliable and feature-rich audio system.
Top Page Image Contents