There are four buttons as indicated in the illustration.
TIME/CALENDAR
display
STOPWATCH
display
B | C | A |
|
D
STROKE/FREQUENCY
MEASURING display
TIME/CALENDAR SETTING
ACCUSPLIT products use a common setting procedure known as
S1 | (2 sec) - Enter set function OR |
|
|
S1 | (4 sec) - Enter set function & |
| C |
| clear the current settings |
| |
S2 | – Select field to be set | B | A |
| (selected field will flash) |
| Year |
S3 | – Set field to desired settings |
| |
S4 | – Exit setting function |
| Month and date |
|
|
| |
| Hour |
| Seconds |
|
|
| Minutes |
|
|
| D |
| TIME/CALENDAR display mark |
| |
1.Press “D” to show the time/calendar display. The time/calendar display mark will appear.
2.S1 – Press and hold “B” for 2 seconds until seconds display begins flashing.
STROKE/FREQUENCY MEASURING MODE
4
5
3.S2 – Press “B” repeatedly to select the digits (flashing) to be adjusted. With each press of “B,” the digits to be adjusted change over in the following order.
seconds 
minutes 
hour 
year 
month 
date
Note: The watch exits set mode automatically after setting date.
4.S3 – Press “A” to set the flashing digits or reset the seconds to “00”.
•The digits move quickly if “A” is kept pressed.
•When the seconds digits count any number from ”30” to “59” and “A” is pressed, one minute is added and the second digits are reset to “00”.
5.S4 – After all the adjustments are completed, press “A” repeatedly until watch exits set mode and returns to the TIME/CALENDAR display.
Notes:
1.Hour digits are displayed in the 24-hour indication.
2.Year digits can be set from 1988 to 2027. The calendar adjusts automatically for odd and even months including February of leap years.
STOPWATCH
Press “D” in the TIME/CALENDAR display to show the STOPWATCH display. The STOPWATCH display mark will appear.
The STOPWATCH can measure up to 10 hours in hours, minutes, seconds and 1/100 seconds.
•Before using the stopwatch be sure to reset the digits to “0:00:00.00”. When the stopwatch is stopped, press ”B” to reset.
When the stopwatch is counting, press “A” to stop the measurement and then press “B”.
| C |
B | A |
| Split time |
Split/lap number | Lap time |
| Total time (accumulated |
| elapsed time) |
STOPWATCH display mark | D |
6 | 7 |