Wintec Industries WBT-200 manual Part 8 Trouble shooting

Page 29

Part 8 Trouble shooting

The GPS signal will become weak under the following conditions. If the vehicle enters the tunnel. The GPS signal transmits linearly down to earth and its signal is blocked out in this situation.

GPS satellite coverage gets poor because of high-rise building or thick forest. Even though WBT-200 can receive reflected weak GSP signal, the data might be less accurate.

The sun shade in the vehicle can partially block out GPS signal and effect good reception. The GPS satellite is under control of USA and the accuracy might vary depending on some special purpose (as may be required by USA).

It is a normal situation when GPS data displayed by the receiver device shows a big difference from real position because of unstable atmospheric condition which causes GPS axis to drift from actual map axis occasionally.

Some navigation software can only decode latitude/longitude from NMEA0183 provided by logger. No altitude information is available and therefore it cannot define vehicle’s position whether that is over or under the bridge.

After successful positioning of WBT-200, if it is moved to another area of 500 km away it cannot be easily re-positioned. This is because the firstly recorded data (position, time and number of satellites acquisitioned) is different from the new area. It will need longer time for re-positioning.

When the power LED flashes red, the battery is critically low and needs re-charging. If it is not recharged within 30 min, GPS will stop to work to prevent total exhaust of power.

PIN code will be requested after Bluetooth connection initiates between GPS and PDA. Enter code as 0000.

Avoid placing 2 GPS devices too close during positioning.

28

Image 29
Contents Page Table of contents Contents Overview GPS LED Green LED Part 1 Product introductionPart 2 Features Part 3 Safety notes Part 4 Quick user guide Page Part 5 Operation notes Page Part 6 USB driver installation guide 、 Installation is done when this screen displays Page 、 The screen will display as below. Click continue anyway 、 Installation completed Page Page Page Part 7 Using with PDA Page Page Page Page Page Page Page Page Page Page Part 8 Trouble shooting